ProDino Ethernet Examples
ProDino Ethernet Examples
0
Components
Hardware componentsProDino Ethernet
x 1
ProDino MKR Zero Ethernet
x 1
ProDino MKR GSM Ethernet
x 1
Project description
ProDino Ethernet examples suggest you how to use your board. The board details...
Table of Contents:
How to start with examples
Following next steps
-
If you don not install our library with examples,?see here...
- In Arduino IDE selects File>Examples>KMPDinoEthernet>(example name)
- Click over the button "Verify"
- Press the button "Upload"
Warning: If your local network address is not in range 192.168.1.1 - 192.168.1.254, you should change?_ip address variable (in sketch) with free IP address from your network. An example: your network is: 192.168.0.x. You change IP address to 192.168.0.199. After you upload your sketch in ProDino Ethernet board, it will response from the new address.
