Gpio
Wireless
No replies yet. Be the first to reply.
Join the discussion.
Wireless
No replies yet. Be the first to reply.
Join the discussion.
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
RE: Gpio
by kaizen ·
Hi
If you want to control the GPIOs through TCP/IP, you have to control in your MCU.
For example, When WizFi250 receives TCP/IP packet, Your MCU can use AT command like <AT+FGPIO>.
For detailed information about <AT+FGPIO>, refer to [url]http://wizwiki.net/wiki/doku.php?id=products:wizfi250:wizfi250pg:start#at_fgpio[/url]
And I will check it about eagle lib and footprint data.
Thank you.
RE: Gpio
by snipor ·
Hi,
thanks for your response. I thought there might be a way to use the GPIOs directly without a MCU.
Thus, the GPIOs have no sense to me, since I can directly use the GPIOs from the MCU.
Eagle Data (lib/Footprint/IF-Board schematic/board file) would be great. When could you send me this?
The mentor graphics pads file from the wiki wizwiki.net/wiki/lib/exe/fetch.p … h_v100.zip doesn’t help me, since i have no licence for this program.
Mr. Wuelbeck from european service wanted to care of it last week, but unfortunately he seems to be in trouble because of the embedded world exhibition.
Thank you.
RE: Gpio
by kaizen ·
Hi
If you can use web interface, WizFi250 can control GPIOs directly without a MCU.
For detailed information, refer to this URL and attached document.
[url]http://wizwiki.net/wiki/doku.php?id=products:wizfi250:wizfi250pg:start#gpio_control[/url]
LED_Control.pdf (233 KB)
Thank you.
RE: Gpio
by snipor ·
Hi,
thanks for your response. I have to control it through TCP/IP commands, so the web interface is no option for me.
But that’s not real problem for me, beacause of this I will use a separate MCU now.
At the moment the eagle data are more important for me. Were you able to find something out about it?
Thanks.
RE: Gpio
by jeongsk ·
Hi snipor
You wants WizFi250 Eagle CAD Library?
I’ve uploaded the WizFi250 Eagle CAD Library to WizWiki.
[url]http://wizwiki.net/wiki/lib/exe/fetch.php?media=products:wizfi250:wizfi250evbsch:wiznet.zip[/url]
Thank you.