SSL handshake fail in step MBEDTLS_SSL_CLIENT_FINISHED

tommyliu0804 · 2022-03-14T12:49:16+09:00

The SSL handshake was fail in step MBEDTLS_SSL_CLIENT_FINISHED, the return code of mbedtls_ssl_write_finished(ssl) was -7 which means SOCKET_CLOSED by Sn_SR. The call stack was as following: send() WIZnetSend() mbedtls_ssl_flush_output() mbedtls_ssl_write_record() mbedtls_ssl_write_handshake_msg() mbedtls_ssl_write_finished() mbedtls_ssl_handshake_client_step() mbedtls_ssl_handshake() wiz_tls_connect() I also check the other registers when send fail Sn_SR = 0x00; 2Sn_IR = 0x17; //It’s odd all the interrupt status set to 1 Sn_IMR = 0x1F; //all kinds of interrupt enabled Sn_CR = 0x0; //no hint from command register SIR = 0x1; // socket 0 has interrupt occurred RTR = 0xFFFF; //max timeout RCR = 0x09; //retry count I doubt it’s caused by timeout. But still the same after increase the RTR to the max value before handshake. And, it also mentioned in datasheet: If a RST packet is received from a peer during communication, Sn_SR is unconditionally changed to SOCK_CLOSED How to make sure the RST packet was received? Is there any hint from the registers’ value? How to debug fail in this step and go further? Thanks, Tommy

Log in to WIZnet Makers

Share projects and connect with makers.

Joined before the site update? first.

New to WIZnet Makers?

Sign up for WIZnet Makers

Already have an account?

Reset your password

Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.

Know your password?

Need an account?