WizFi210 LimitedAP

Question

I’m creating limited acces point with wizfi210 and following commands: AT+XDUM=0 AT+BDATA=1 AT+WD AT+WM=2 AT+WAUTH=1 AT+WWEP1=1234567890 AT+NSET=192.168.55.1,255.255.255.0,192.168.55.1 AT+WA=LimitedAP After that I can connect to LimitedAP from computer and phone, and I can ping it from both. But I can’t ping phone from PC, and PC from phone. PC and phone has static network settings, 192.168.55.3, 192.168.55.5 addresses, if this matter. What am I doing wrong?

ssekim · Answer

Hello Georgiy WizFi210 can’t run as L2 switch. In other words, WizFi210 can transmit the data with phone and WizFi210 can transmit the data with computer but phone and computer can’t transmit the data each other.

Georgiy · Answer

Thank you for your reply. Is there something about that in documentation?

Georgiy · Answer

Could you recommend me some module that has L2 switching?

ssekim · Answer

Hello Georgiy WizFi630 and WizFi250 have L2 switching function. WizFi630 have full functions of standard access point. But, WizFi250 have some limitation like WiFi throughput, WiFi station capability and so on.