Problem with Ping w5100

Question

Hi, When i connect this shield, with 5.5v, lights pwr-link-spd-fdx are on, rx blink some times, and tx less often. On the code i spécified an ip address fix, subnet and gateway. ip:192.168.1.25 subnet:255.255.255.0 gateway (router):192.168.1.1 my router (192.168.1.1) is operationnal and have i good configuration => the router detect the link on 100M, but nothing else (i don’t see the ip on list of computer who are connected) => if a ping the adress 192.168.1.25 (the shield w5100), it says “host unreachable”, but i see that the rx’s led blink at the same time. I have connect the shield on pin 50,51,52,53 on my arduino mega 2560. What’s the problem ? Sorry for my bad english

Lusitanos67 · Answer

Hi, Thank for your reply. I would make a video after work

Lusitanos67 · Answer

the Rx blink some times, but tx never statistics from my router on port lan Compteur octets émis 30.66 KB Collisions 0 Compteur octets reçus 592.00 B Erreurs FCS 0 tx_good_bytes = 372859 tx_collisions = 0 tx_unicast_pkts = 10 tx_multicast_pkts = 981 tx_broadcast_pkts = 1390 rx_good_bytes = 12950 rx_fcs_errors = 0 rx_unicast_pkts = 175

Lusitanos67 · Answer

someone have i little code (arduino) for checking the register of the w5100 shield ?

kavireloot · Answer

hi i have the same problem… and how can i Test to read and write W5100 registers in shield? best regards

Coccoliso · Answer

On wiznet site you can found generic C++ library here [url]http://www.wiznet.co.kr/wp-content/uploads/wiznethome/Chip/W5100/Software/W5100_Driver_V180(0).zip[/url] for read and write registers. Download W5100 app note here [url]http://www.wiznet.co.kr/wp-content/uploads/wiznethome/Chip/W5100/Application%20Note/W5100_Application_Note.zip[/url] for see how use driver library ( see DHCP and DNS examples first ) For arduino libs and how to use W5100 shield can see here: [url]https://www.arduino.cc/en/Main/ArduinoEthernetShield[/url] [url]https://www.arduino.cc/en/Guide/ArduinoEthernetShield[/url] [url]https://www.arduino.cc/en/Reference/Ethernet[/url]