W5100 stop working after 6 min
Ethernet Chips
No replies yet. Be the first to reply.
Join the discussion.
Ethernet Chips
No replies yet. Be the first to reply.
Join the discussion.
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
RE: W5100 stop working after 6 min
by Kvy ·
Hi,
I quote a part of code from the socket.cpp file of Arduino ethernet library.
The entire code is:
#include “w5100.h”
#include “socket.h”
static uint16_t local_port;
/**
@brief This Socket function initialize the channel in perticular mode, and set the port and wait for W5100 done it.
@return 1 for success else 0.
*/
uint8_t socket(SOCKET s, uint8_t protocol, uint16_t port, uint8_t flag)
{
if ((protocol == SnMR::TCP) || (protocol == SnMR::UDP) || (protocol == SnMR::IPRAW) || (protocol == SnMR::MACRAW) || (protocol == SnMR::PPPOE))
{
close(s);
W5100.writeSnMR(s, protocol | flag);
if (port != 0) {
W5100.writeSnPORT(s, port);
}
else {
local_port++; // if don’t set the source port, set local_port number.
W5100.writeSnPORT(s, local_port);
}
W5100.execCmdSn(s, Sock_OPEN);
return 1;
}
return 0;
}
/**
*/
void close(SOCKET s)
{
W5100.execCmdSn(s, Sock_CLOSE);
W5100.writeSnIR(s, 0xFF);
}
/**
*/
uint8_t listen(SOCKET s)
{
if (W5100.readSnSR(s) != SnSR::INIT)
return 0;
W5100.execCmdSn(s, Sock_LISTEN);
return 1;
}
/**
*/
uint8_t connect(SOCKET s, uint8_t * addr, uint16_t port)
{
if
(
((addr[0] == 0xFF) && (addr[1] == 0xFF) && (addr[2] == 0xFF) && (addr[3] == 0xFF)) ||
((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
(port == 0x00)
)
return 0;
// set destination IP
W5100.writeSnDIPR(s, addr);
W5100.writeSnDPORT(s, port);
W5100.execCmdSn(s, Sock_CONNECT);
return 1;
}
/**
*/
void disconnect(SOCKET s)
{
W5100.execCmdSn(s, Sock_DISCON);
}
/**
*/
uint16_t send(SOCKET s, const uint8_t * buf, uint16_t len)
{
uint8_t status=0;
uint16_t ret=0;
uint16_t freesize=0;
if (len > W5100.SSIZE)
ret = W5100.SSIZE; // check size not to exceed MAX size.
else
ret = len;
// if freebuf is available, start.
do
{
freesize = W5100.getTXFreeSize(s);
status = W5100.readSnSR(s);
if ((status != SnSR::ESTABLISHED) && (status != SnSR::CLOSE_WAIT))
{
ret = 0;
break;
}
}
while (freesize < ret);
// copy data
W5100.send_data_processing(s, (uint8_t *)buf, ret);
W5100.execCmdSn(s, Sock_SEND);
/* +2008.01 bj /
while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
{
/ m2008.01 [bj] : reduce code /
if ( W5100.readSnSR(s) == SnSR::CLOSED )
{
close(s);
return 0;
}
}
/ +2008.01 bj */
W5100.writeSnIR(s, SnIR::SEND_OK);
return ret;
}
/**
*/
int16_t recv(SOCKET s, uint8_t *buf, int16_t len)
{
// Check how much data is available
int16_t ret = W5100.getRXReceivedSize(s);
if ( ret == 0 )
{
// No data available.
uint8_t status = W5100.readSnSR(s);
if ( status == SnSR::LISTEN || status == SnSR::CLOSED || status == SnSR::CLOSE_WAIT )
{
// The remote end has closed its side of the connection, so this is the eof state
ret = 0;
}
else
{
// The connection is still up, but there’s no data waiting to be read
ret = -1;
}
}
else if (ret > len)
{
ret = len;
}
if ( ret > 0 )
{
W5100.recv_data_processing(s, buf, ret);
W5100.execCmdSn(s, Sock_RECV);
}
return ret;
}
/**
*/
uint16_t peek(SOCKET s, uint8_t *buf)
{
W5100.recv_data_processing(s, buf, 1, 1);
return 1;
}
/**
*/
uint16_t sendto(SOCKET s, const uint8_t *buf, uint16_t len, uint8_t *addr, uint16_t port)
{
uint16_t ret=0;
if (len > W5100.SSIZE) ret = W5100.SSIZE; // check size not to exceed MAX size.
else ret = len;
if
(
((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
((port == 0x00)) ||(ret == 0)
)
{
/* +2008.01 [bj] : added return value */
ret = 0;
}
else
{
W5100.writeSnDIPR(s, addr);
W5100.writeSnDPORT(s, port);
}
return ret;
}
/**
*/
uint16_t recvfrom(SOCKET s, uint8_t *buf, uint16_t len, uint8_t *addr, uint16_t *port)
{
uint8_t head[8];
uint16_t data_len=0;
uint16_t ptr=0;
if ( len > 0 )
{
ptr = W5100.readSnRX_RD(s);
switch (W5100.readSnMR(s) & 0x07)
{
case SnMR::UDP :
W5100.read_data(s, (uint8_t *)ptr, head, 0x08);
ptr += 8;
// read peer’s IP address, port number.
addr[0] = head[0];
addr[1] = head[1];
addr[2] = head[2];
addr[3] = head[3];
*port = head[4];
*port = (*port << 8) + head[5];
data_len = head[6];
data_len = (data_len << 8) + head[7];
}
return data_len;
}
uint16_t igmpsend(SOCKET s, const uint8_t * buf, uint16_t len)
{
uint8_t status=0;
uint16_t ret=0;
if (len > W5100.SSIZE)
ret = W5100.SSIZE; // check size not to exceed MAX size.
else
ret = len;
if (ret == 0)
return 0;
W5100.send_data_processing(s, (uint8_t *)buf, ret);
W5100.execCmdSn(s, Sock_SEND);
while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
{
status = W5100.readSnSR(s);
if (W5100.readSnIR(s) & SnIR::TIMEOUT)
{
/* in case of igmp, if send fails, then socket closed /
/ if you want change, remove this code. */
close(s);
return 0;
}
}
W5100.writeSnIR(s, SnIR::SEND_OK);
return ret;
}
uint16_t bufferData(SOCKET s, uint16_t offset, const uint8_t* buf, uint16_t len)
{
uint16_t ret =0;
if (len > W5100.getTXFreeSize(s))
{
ret = W5100.getTXFreeSize(s); // check size not to exceed MAX size.
}
else
{
ret = len;
}
W5100.send_data_processing_offset(s, offset, buf, ret);
return ret;
}
int startUDP(SOCKET s, uint8_t* addr, uint16_t port)
{
if
(
((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) ||
((port == 0x00))
)
{
return 0;
}
else
{
W5100.writeSnDIPR(s, addr);
W5100.writeSnDPORT(s, port);
return 1;
}
}
int sendUDP(SOCKET s)
{
W5100.execCmdSn(s, Sock_SEND);
/* +2008.01 bj /
while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK )
{
if (W5100.readSnIR(s) & SnIR::TIMEOUT)
{
/ +2008.01 [bj]: clear interrupt */
W5100.writeSnIR(s, (SnIR::SEND_OK|SnIR::TIMEOUT));
return 0;
}
}
/* +2008.01 bj */
W5100.writeSnIR(s, SnIR::SEND_OK);
/* Sent ok */
return 1;
}
RE: W5100 stop working after 6 min
by Kvy ·
Hi midnightcow,
Thanks for the replay.
I didn’t change the original Ethernet library. I don’t get SEND_OK, and it happens when the data rate is as I mention above, with slower data rate it works fine.
I also tried modifying the Ethernet library and my own time out, it also didn’t help (in the sendUDP):
while ((W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK) {
}
Thnaks
Yoav