WizFi Shield

becky

Published September 20, 2020

Project description

Radio Protocol: IEEE 802.11b/g/n Compatible Supported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b) Modulation: DSSS and CCK RF Operating Frequency: 2.4 - 2.497 GHz Antenna Options: Chip antenna and U.FL connector for external antenna Networking Protocols: UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**) Power Consumption(Typical): Standby = 34.0 μA, Receive = 125.0 mA, Transmit = 135.0 mA RF Output Power (Typical): 8dBm ± 1dBm I/O Interface: UART, SPI, I2C WAKE, ALARM, GPIOs Power Source: 5V Dimensions: 68 x 66 x 19 mm

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

Temperature and Humidity Data Logger

becky

Views 716
Comments 0

Sending BMP180 Temperature Data To Thingspeak Using An Arduino Uno And Ethernet Shield

becky

Views 1112
Comments 0

Arduino to Control Home Appliance Using Web App

becky

Views 560
Comments 0

Temperature Logger Using Arduino Into Google Spread Sheet

becky

Views 621
Comments 0