[MODLINK] Wifi-LINK

WIZnet

Published April 20, 2023

Original author: VITCON · South KoreaOriginal source (new tab)

Components

Hardware components

WIZnet - WizFi250

x 1

Project description

DETAILS

VITCON is Korean company who sells Micom modules, IO modules, communication modules and controllers. These products are designed for students, engineer and everyone. With this a base board and various modules, you can start a project very easily.

http://www.vitcon.co.kr/

VITCON sells MODLINK. Here are some features about MODLINK.

3.3V, 5V Operating Voltage
40mA Current per I/O Pin
Serial to Wi-Fi Converter : 1CH
Support interface for connecting Wi-Fi module

For more information, refer to this URL.

http://vitconshop.com/goods/view?no=751

Comments

Similar projects you might like

A quick demo to Test WizFi250 GPIO Control with Android App

WizFi250 GPIO Control with Android

WIZnet

Views 325
Comments 0

ETHERNET-LINK and IOTS-W43 of VITCON

WIZnet

Views 196
Comments 0

This project will show you how to program the IoT Development Kit from ON Semiconductor by using built in example code.

IoT Development Kit (IDK) Example

WIZnet

Views 211
Comments 0

microADSB-WiFi receiver v.2

[Re] microADSB-WiFi receiver v.2

rena

Views 393
Comments 0

Arduino as a wireless HTTP client

WIZnet

Views 151
Comments 0

Indonesia is located at the junction of three tectonic plates, and the Maluku Island it self has 10 fault line zones, so the impact.

Wireless Sensor Network Design for Earthquake’s and Landslide’s Early Warnings

mayuri

Views 1113
Comments 3

The detection of nitrate pollutants is a widely used strategy for protecting water sources. Although ion-selective electrodes (ISEs).

Water Nitrate Remote Monitoring System with Self-Diagnostic Function for Ion-Selective Electrodes

mayuri

Views 648
Comments 3

Comments