This is a W5500 network throughput test based on ESP32 and ESP-IDF
6
WIZnet - WIZ850io
x 1
Espressif - ESP32
x 1
This article is an article measuring Ethernet speed using ESP32 and W5500.
Connect ESP32 and W5500 by SPI and check the speed change by changing the SPI clock.
Because of the use of SPI, there is a speed limit.
WIZ850io enables stable Ethernet connectivity for grblHAL CNC controllers by offloading TCP/IP to W5500 hardware, ensuring deterministic motion control.
Voron-Documentation
TheoIm
Views 428
Comments 0
This project unlocks a cheap NORVI Arita controller by adding a W5500 Ethernet module and OLED, transforming it into a powerful IoT hub through custom firmware.
Ethernet for Arita: Unlocking Hidden IoT Powers with W5500 Modding
lawrence
Views 1395
Comments 0
Todoro’s CNC uses ESP32-P4 for UI, RP2350 for motion, and W5500 for Ethernet+SD—simple, stable, and fully networked CNC control.
ESP32-P4 + RP2350(grblHAL) + W5500 CNC Controller
TheoIm
Views 935
Comments 0
A practical example of connecting the WIZnet W5500 Ethernet module to the SP2302 SBC using SPI to implement a full TCP server/client and UDP socket interface.
TCP/UDP Interface for SP2302 + W5500
sophia
Views 1211
Comments 0
Enable dual Ethernet on SP2302 board using WIZ850io (W5500) module via SPI interface. Perfect for industrial IoT and secure networking applications.
Dual Ethernet Port Expansion for SP2302 Using WIZ850io (W5500)
Benjamin
Views 2803
Comments 0
This guide explains how to connect ESP32-CAM to the internet using a wired Ethernet connection.
ESP32-CAM using HSPI interface and W5500 module
lawrence
Views 15155
Comments 4
ESP32 with interface ethernet using module W5500 Mini protocol HIGH SPI
esp32-W5500Mini
Benjamin
Views 1077
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
