Wiznet makers

UCC

User Created Content

riocore

riocore

lawrence
  • 390

  • 0

STM32 BluePill-based analog monitoring system using the WIZnet W5500 Ethernet module. Measures temperature, voltage, and current with external high-resolution A

STM32_Modbus_AnalogRead

lawrence
  • 718

  • 0

ESP32 Ethernet Controller Comparison: W5500 vs DM9051ANX Performance and Design Analysis

ESP32 Ethernet Controller Comparison: W5500 vs DM9051ANX Performance and Design Analysis

scott
  • 313

  • 0

ESP32 with W5500 logs Growatt RS485 Modbus data to ThingSpeak every 120s for stable wired solar monitoring.

How to Log Growatt Solar Inverter Data with W5500 on ESP32

jakelee
  • 429

  • 0

STM32F4 firmware uses a W5500 Ethernet module to exchange micro-ROS messages over UDP (port 9999) and bridge CAN sensor data to ROS topics.

MATE-ROV-2025

TheoIm
  • 277

  • 0

ESP32와 WIZnet W5500를 SPI로 연결해, Wi-Fi/MQTT/클라우드 없이 로컬 LAN에서 웹페이지 ON/OFF 버튼으로 릴레이(GPIO25)를 제어하는 이더넷 기반 IoT 예제

ESP32 (38-pin) + W5500: Offline LAN Relay Control with a Simple Web Server

sophia
  • 463

  • 0

PER(Purdue Electric Racing)

PER(Purdue Electric Racing)

Aimee0
  • 307

  • 0

industrial-slave-gate

industrial-slave-gate

lawrence
  • 329

  • 0

ESPresense

ESPresense

Aimee0
  • 290

  • 0

HVAC duct inspection robot that uses wired W5500 Ethernet to bypass signal blockage in metal vents. It streams real-time air quality and video data to optimize

Rover for Inspection of Industrial HVAC System Ducts

Lihan__
  • 310

  • 0

SmartEVSE

SmartEVSE

Aimee0
  • 289

  • 0

This project uses a WIZnet W6100 EVB Pico as a wired microcontroller-to-ROS 2 bridge: Zephyr runs on the RP2040, micro-ROS carries messages over UDP

How to Bridge Physical I/O into ROS 2 with W6100 on RP2040?

viktor
  • 332

  • 0

micro-ROS module for Raspberry Pi Pico SDK

micro-ROS module for Raspberry Pi Pico SDK

viktor
  • 252

  • 0

A CircuitPython tally light that exposes a small HTTP API to set LED status for multi-camera live production.

TallyCircuitPy: HTTP-Controlled Tally Light for Live Video Production

josephsr
  • 282

  • 0

A minimal EtherCAT master example that drives a single motor in CiA 402 Profile Position Mode using SOEM on a Raspberry Pi 4 with a WIZnet W5500 SPI Ethernet.

EtherCAT Motor Control Example on Raspberry Pi 4 (SOEM + SPI-W5500)

josephsr
  • 486

  • 0

ESP32-RAKFlasher

ESP32-RAKFlasher

matthew
  • 261

  • 0

About ESP32 controlled collection of Estops and Astops for Freezy Arena

Freezy-Estops

Hannah
  • 346

  • 0

NHKRobocon2025B

NHKRobocon2025B

mason
  • 585

  • 0

Open wire-EDM tension controller on W6100-EVB-Pico2: reads dancer position, drives feed/take-up steppers, and exposes tuning/status over Modbus TCP.

SPOOLER

matthew
  • 319

  • 0

Implementing Auto-Recovery for STM32 + W5500: Handling Ethernet Cable Disconnects

Implementing Auto-Recovery for STM32 + W5500: W5500 모듈테스트

lawrence
  • 553

  • 0

ESP32-C3 & W5500 freezer monitor. Wired Ethernet bypasses Faraday cage effects for stable alerts. Features hardware TCP/IP offloading and DS18B20 sen

ESP32C3W5500 diepvries

Lihan__
  • 376

  • 0

ESP32 + W5500 Seamless Wi-Fi & Ethernet Auto-Switching

ESP32 + W5500 Seamless Wi-Fi & Ethernet Auto-Switching

jaden
  • 379

  • 0

Adding LAN to your ESP32 with the W5500 Ethernet LAN Board

Adding LAN to your ESP32 with the W5500 Ethernet LAN Board

jaden
  • 439

  • 0

Interrupt-driven W5500 Ethernet driver using SPI DMA command queue, exposing BSD-style sockets and DNS/NTP/WebSocket clients on STM32 + FreeRTOS.

Async DMA-Driven W5500 Driver for STM32 + FreeRTOS with BSD Socket API

Benjamin
  • 352

  • 0