Wiznet makers

UCC

User Created Content

This project implements a 4-channel smart switch controller using STM32 and the WIZnet W5500 Ethernet controller, integrated with the Alibaba Smart Living cloud

How to Build a Reliable Ethernet-Based Smart Switch for Alibaba Cloud Using W5500?

chen
  • 225

  • 0

This article explains how an embedded device uses the WIZnet W5500 Ethernet controller to implement an HTTP server for web-based single-switch control

How Does W5500 Enable Industrial Web Control via Alibaba Cloud IoT Studio?

gavinchang
  • 216

  • 0

This article analyzes how TX and RX buffer management on the WIZnet W5500 directly affects TCP performance and long-running system stability.

How Does TX/RX Buffer Management Determine Long-Running Stability on W5500? A Deep Dive into Perform

gavinchang
  • 212

  • 0

Map Tracking Use ESP32 And GPS Module

ESP32_MAP_TRACKING

Hannah
  • 226

  • 0

This article explains how to implement a TCP server using the WIZnet W5500 Ethernet controller in a DHCP-based network environment.

How Does a W5500 TCP Server Work with DHCP-Based Network Bring-Up?

Arnold
  • 263

  • 0

This article introduces an industrial IoT product architecture built on the WIZnet W5500 Ethernet controller and the ESP32-S3-WROOM-1U-N16R8 module.

How Does a W5500 + ESP32-S3 PoE Module Become an Industrial IoT Product?

Arnold
  • 229

  • 0

Industrial-Grade Water Level Monitoring Architecture Based on Hardware TCP/IP

Water level monitor - Arduino / ESP8266 / ESP32 / Sigfox

scott
  • 659

  • 0

Wireless, Low-Cost, and Portable EMG System

Wireless Data Acquisition - Wireless, Low-Cost, and Portable EMG System

Hannah
  • 219

  • 0

Firmware para dispositivo medidor de soiling en paneles solares fotovoltaicos

Dispositivo-medidor-de-Soiling

Hannah
  • 203

  • 0

First-party packages 📦 from atopile

First-party packages 📦 from atopile

matthew
  • 186

  • 0

libogc2 by Extrems’ Corner modernizes the GameCube/Wii homebrew SDK, adding lwIP networking and EXI Ethernet support for WIZnet W5500 and W6100/W6300 adapters.

libogc2

matthew
  • 202

  • 0

ESP32-Usb-Host-MIDI

ESP32-Usb-Host-MIDI

mason
  • 208

  • 0

SzufladaV2 is a ROS2 Jazzy rover control stack that splits responsibilities cleanly: an ESP32 handles low-level motor I/O and sensors

How to Bridge a ROS2 Jazzy Rover to Wired Ethernet with W5500 on ESP32?

viktor
  • 216

  • 0

Docker-deployed Telegram bot infers building power status from ESP32 heartbeats, stores in SQLite, notifies users, and exposes a read-only HTTP status API.

PowerBot: Telegram Power Status Bot with ESP32 Heartbeats and Read-Only Status API

josephsr
  • 237

  • 0

A PROFINET device-stack evaluation port aimed at running on MCUs with lwIP for demo/testing.

MCU Port of P-Net PROFINET Device Stack Using lwIP

josephsr
  • 174

  • 0

3d-joystick-controller

3d-joystick-controller

mason
  • 288

  • 0

KSP-Controller

KSP-Controller

mason
  • 253

  • 0

StEth-Boot

StEth-Boot

mason
  • 260

  • 0

Custom PCB with STM32F407 and W5500 for remote MQTT control of satellite LNB polarization, DiSEqC motor positioning, and IF signal routing over Ethernet.

TM32F407 + W5500: Ethernet-Connected DiSEqC Satellite Motor Controller

Benjamin
  • 230

  • 0

This repository implements an ESP32-based home theater controller that relies on a hardwired Ethernet link (WIZnet W5500 over SPI)

How to build a wired TLS WebSocket home theater controller with WIZnet W5500 on ESP32 (ESP-IDF)?

viktor
  • 343

  • 0

This project uses the ESP32-S3-POE-ETH board (Waveshare) with ESP-IDF framework to create a WiFi-Ethernet SSL bridge

esp32-wifi-bridge

viktor
  • 204

  • 0

ESP32_AdBlocker is an Arduino-based DNS sinkhole that blocks ads and trackers by answering blocked DNS queries with 0.0.0.0,

How to Run a DNS Ad Blocker with W5500 Ethernet on ESP32-S3?

viktor
  • 276

  • 0

The eth-w5500 project packages WIZnet’s W5500 (SPI Ethernet) into an ESP-IDF-friendly component with a small, struct-based API

How to Integrate WIZnet W5500 SPI Ethernet on ESP-IDF for ESP32?

viktor
  • 293

  • 0

PierVibrationSensor is an embedded vibration-monitoring node built around a Raspberry Pi Pico 2 W and a WIZnet W5500 Ethernet interface.

How to Monitor Structural Vibration with W5500 on Raspberry Pi Pico 2 W?

viktor
  • 229

  • 0