Wiznet makers

An Arduino Library providing a ASCOM Alpaca UDP and HTTP server, with examples for AAVSO AstroMakers devices.

Astro Makers project to make a weather monitor box for and observatory

test with tcp sever loopback , ethernet stack working

Pocket LAN tester with 30+ protocol tools (ARP/DHCP/LLDP/SNMP/PXE/802.1X) on Flipper Zero + W5500, MACRAW & TOE dual-socket architecture

4G cellular uplink shared via WiFi SoftAP and W5500 Ethernet simultaneously using esp-iot-bridge on ESP32-S3

A real-time STM32H750 system for triggered nozzle waveform capture, batch acquisition, filtering, and UART or UDP transmission.

An embedded IRC client for the Tanmatsu badge that combines LVGL UI, asynchronous IRC handling, and Wi-Fi or WIZnet W5500 Ethernet access.

I am using the Raspberry Pi B+ to build something of a home automation system. It has EnOcean Wireless Sensors, some arduinos and MQTT and a CC3200. I am also g

STM32F407-lvgl-fft-display-W5500-REACT-password-project

led-display-websocket-demo

A fully open-source, ESP32-S3 based differential solar thermal controller with dual-tank switching, PT1000 sensing, TRIAC control, ethernet.

ESP32와 W5500을 활용하여 ESP-NOW 기반 무선 센서 네트워크를 Ethernet으로 연결하는 게이트웨이

ESP32와 WIZnet W5500을 활용하여 Modbus TCP와 Modbus RTU 간 통신을 연결하는 산업용 게이트웨이를 구현

STM32 마이크로컨트롤러에서 OpenPLC 런타임을 실행하고, WIZnet W5500 Ethernet 칩을 통해 산업용 네트워크 통신을 구현한 임베디드 제어 시스템

About Creality Wi-Fi Bridge — ESP32-S3 + W5500 Ethernet + ILI9341 TFT. Transparent L2 bridge (MAC spoofing) from Ethernet to WiFi.

A Practical AI-On-The-Edge-Cam Solution with ESP32-S3, W5500 Ethernet, and PoE

ModbusTCP_RU is an Arduino library for building Modbus TCP Master and Slave devices on boards equipped with W5100 or W5500 Ethernet controllers.

era-lib is an open-source library used to connect devices to ERa IoT Platform, which is developed and operated by EoH.

This STM32-focused article explains how to build a TCP client around the WIZnet W5500 by treating the chip as a socket-oriented Ethernet engine rather than a si

This educational project explains how to integrate the WIZnet W5500 with an STM32L4 platform and use it as a hardware network engine beneath the application

This project uses the WIZnet W55MH32 as the main controller for an Ethernet-connected infrared gateway that can receive cloud commands,

This educational walkthrough explains how an MCU uses the WIZnet W5500 as its Ethernet interface and transport engine over SPI.

This article is a driver-oriented technical walkthrough of the W5500 rather than a full repository-backed product,

How to Understand W5500 Driver Flow and Architecture from a Hardware TCP/IP Perspective?