Wiznet makers

UCC

User Created Content

The eth-w5500 project packages WIZnet’s W5500 (SPI Ethernet) into an ESP-IDF-friendly component with a small, struct-based API

How to Integrate WIZnet W5500 SPI Ethernet on ESP-IDF for ESP32?

viktor
  • 155

  • 0

PierVibrationSensor is an embedded vibration-monitoring node built around a Raspberry Pi Pico 2 W and a WIZnet W5500 Ethernet interface.

How to Monitor Structural Vibration with W5500 on Raspberry Pi Pico 2 W?

viktor
  • 131

  • 0

ESP32-DCU-Rev1

ESP32-DCU-Rev1

mason
  • 110

  • 0

How Browser Policy Changes Are Reshaping Embedded TLS Design

HTTPS化(マイコンHTTPサーバー)

scott
  • 92

  • 0

An ESP32-based OCPP 1.6J Central System can sit between an EV wallbox and your home energy manager.

How to build an ESP32 OCPP 1.6J Central System with W5500 Ethernet?

viktor
  • 177

  • 0

STM32F103C8T6 (Blue Pill) + W5500 Multi-Display IoT Starter

How do you control Ethernet, LCD, and LED Matrix all at once with a $1 STM32 Blue Pill?

Benjamin
  • 113

  • 0

Vajravolt VVM701

Vajravolt VVM701

Alan
  • 254

  • 0

A Linux-based system brings puppets to life by synchronizing servo movements with audio. ESP32 network nodes with W5500 Ethernet enable scalable, real-time cont

Open-Source Animatronic Puppet Control System with Distributed Network Nodes

Lihan__
  • 140

  • 0

ESPHome 🧠 MultiSensor Board

ESPHome MultiSensor Board

Alan
  • 267

  • 0

An ESP32 relay controller combining WiFi and W5500 wired Ethernet on a single-layer PCB.

ESP32-Based 8-Channel Relay Control System with W5500 Ethernet LAN

Lihan__
  • 131

  • 0

MockingBoard + Uthernet II = Music!

MockingBoard + Uthernet II = Music!

jaden
  • 108

  • 0

STM32L152 + ESP32 Wroom 보드

STM32L152 + ESP32 Wroom 보드

jaden
  • 139

  • 0

This project implements a 4-channel cloud-controlled switch using the OneNET cloud platform and the HTTP protocol.

How to Build a Reliable HTTP-Based Cloud Switch Controller with W5500 and OneNET?

ronpang
  • 80

  • 0

W5500-EVB-PICO is an evaluation board that combines the RP2040 microcontroller with the WIZnet W5500 Ethernet controller.

How Does W5500-EVB-PICO Enable Reliable Ethernet Networking for RP2040 Projects?

ronpang
  • 88

  • 0

This project demonstrates an RP2040-based embedded system using the WIZnet W5500 Ethernet controller to achieve reliable, wired TCP/IP communication.

How to Build a Stable Ethernet-Based Industrial IoT Node with RP2040 and W5500?

chen
  • 106

  • 0

W5500 and new network tab

W5500 and new network tab

gunn
  • 110

  • 0

Teensy 4.1 - W5500 using SPI DMA

Teensy 4.1 - W5500 using SPI DMA

gunn
  • 120

  • 0

ESP-NODE-2RDM is an ESP32-S3 Art-Net v4 / sACN (E1.31) node that outputs two DMX512/RDM ports with multi-source merging. It uses a WIZnet W5500 SPI-Ethernet.

How to Build a Dual-Port Art-Net v4 / sACN to DMX512/RDM Node with WIZnet W5500 on ESP32-S3?

viktor
  • 249

  • 0

This article explains how to debug common Ethernet failures when using the WIZnet W5500 with STM32 microcontrollers.

How Do You Debug Common W5500 Failures on STM32?

Arnold
  • 92

  • 0

This project builds a pro-grade Art-Net (UDP) to WS2812 controller on RP2350, driving 12,288 LEDs across 12 outputs at 30+ FPS.

High-Performance ArtNet to WS2812 Controller

viktor
  • 130

  • 0

This article explains how an STM32 microcontroller communicates with the WIZnet W5500 Ethernet controller through SPI at the register level.

How Does STM32 Communicate with W5500 at the Register Level?

Arnold
  • 101

  • 0

This article explains how to bring up Ethernet networking on the W5500-EVB-Pico using a static IP configuration.

How Do You Bring Up Ethernet with a Static IP on W5500-EVB-Pico?

Arnold
  • 133

  • 0

C11-P04-F04-SE_RAMP

C11-P04-F04-SE_RAMP

TheoIm
  • 107

  • 0

Optimized Arduino Code for controlling of my AstroShell Dome

astroshell

Hannah
  • 112

  • 0