Super Sentai Cat Smart Room Controller
Super Sentai Cat Smart Room Controller
0
Components
Hardware components
teensy - Teensy 3.1
x 1
Arduino - Arduino Ethernet Shield 2
x 1
Rotary Encoder with push button
x 1
Sparkfun Push Button switch 12mm
x 1
ElectroPeak 0.96" OLED 64x128 Display Module
x 1
DFRobot Gravity: I2CBME280 Environmental Sensor
x 1
Adafruit NeoPixel Ring: WS2812 5050 RGB LED
x 1
Adafruit Flora RGB NeoPixel LEDs Pack of 4
x 1
Rotary Potentiometer (Generic)
x 1
Project description
ABOUT THIS PROJECT The purpose of this project was to program a microprocessor controller to control different devices in the room. I modeled my project after the first book that I read on programming called "why's (poignant) Guide to Ruby"; where it follows a cat through the process of learning Ruby. I wanted my project to be a project for a middle or high school student wanting to learn how to program and build smart devices. I chose to use images from the book because of how artistic the book is. Ruby is an easy language to learn (but has limited application), while C++ is a difficult…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
