Remora-STM32F4xx-W5500

COMPONENTS Hardware components

WIZnet - W5500

x 1

PROJECT DESCRIPTION

Expatria Technologies has released the "Remora-STM32F4xx-W5500," a project that integrates STM32F4 microcontrollers with the W5500 Ethernet module. This project is designed for embedded systems and IoT applications, drawing inspiration from the Remora and GRBLHAL projects.

Installation Guide

1. Clone the Remora-NVEM Repository: Use the following commands to clone and navigate to the Remora-NVEM repository:

bash

git clone https://github.com/Expatria-Technologies/Remora-NVEM.git cd Remora-NVEM/LinuxCNC/Components/Remora-nv

2. Compile with Halcompile: Compile the component using the command:

css

sudo halcompile --install remora-nv.c

3. Configuration Upload: Use upload_config.py to upload your configuration file to FlexiHAL:

arduino

python3 upload_config.py FlexiHAL-config.txt

Dependencies

The firmware is based on an unchanged version of the Remora-nv Ethernet and is tested with the Flexi-Pi LinuxCNC image.

Documents

Remora-STM32F4xx-W5500

Comments Write