How to build WIZnet-ioNIC-micropython

"This content posts how to build WIZnet-ioNIC-micropython.

COMPONENTS Hardware components

WIZnet - W55RP20-EVB-Pico

x 1

Software Apps and online services

micropython - MicroPython

x 1

PROJECT DESCRIPTION

This content posts how to build WIZnet-ioNIC-micropython.

If you do not need to build WIZnet-ioNIC-micropython, please download firmware.uf2 for the W55RP20 from the link below.

https://github.com/WIZnet-ioNIC/WIZnet-ioNIC-micropython/releases

This guide was built on Raspberry Pi 5.

1. Clone Source Code

git clone --recurse-submodules https://github.com/WIZnet-ioNIC/WIZnet-ioNIC-micropython.git

2. Build Code

cd WIZnet-ioNIC-micropython/ports/rp2 
make BOARD=W5500_EVB_PICO -j 4

3. Writing to W55RP20-EVB-PICO
While holding down the BOOTSEL button on the W55RP20-EVB-PICO, press and release the RUN button to enter removable disk mode.
Copy and paste the WIZnet-ioNIC/ports/rp2/build-W5500_EVB_PICO/firmware.uf2 file to the removable disk of the W55RP20-EVB-PICO.

4. Running example
Run the examples located in the WIZnet-ioNIC-micropython/WIZnet-ioNIC_examples path in Thonny.

Please refer to the video below.

Documents

WIZnet-ioNIC-micropython

Comments Write