Wiznet makers

This guide provides instructions on how to build the W55RP20-EVB-Pico on Arduino. The Arduino version used is 1.8.19, which can be downloaded from the link below.
https://www.arduino.cc/en/software

Additionally, this post is based on and works with earlephilhower's arduino-pico.
https://github.com/earlephilhower/arduino-pico

1. Installing Raspberry Pi Pico/RP2040/RP2350 Boards
   Open Arduino, go to File -> Preferences -> Additional Boards Manager URLs:
   Input https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
   
   
   And go to Tools -> Board -> Boards Manager, search for 'RP2040', and install Raspberry Pi Pico/RP2040/RP2350 (version 4.2.0 or later).
   
    
2. Build example and check
   Go to File -> Examples -> lwIP_w55rp20 -> WiFiClient-W55RP20
   And Go to Tools -> Board -> Raspberry Pi RP2040 -> WIZnet W5500-EVB-Pico
   
   
   
    
3. Click Upload
   
   
   Check serial terminal
   Since the WiFi module is not currently connected, an error will occur, but you can check that an IP address is assigned to the Ethernet through DHCP.