[Nucleo Experience] + STM32L053 Nucleo + Latest Network Module W5500 for Networking

COMPONENTS

PROJECT DESCRIPTION

Plug the W5500 module into the STM32L053 Nucleo development board and connect the network cable. Connect one end of the network cable to the router and the other end to the W5500 module.
Note: The computer and the development board must be connected to the same local area network (LAN). Then power on the board and download the compiled program to it.

Open the computer's DOS interface and type: ping 192.168.1.20 to check if the ping is successful.

Documents

Codes

Comments Write