[From QnA] I can't configure WIZ145SR: Invalid Msg Recv

Question

I’m trying to configure a new WIZ145SR module using the WIZ14xSR ConfigTool Rev 1.41, but each time I click the search button the debug port on the module shows: Invalid Msg Recv. The ConfigTool does not find the device. How can I configure it!! Here is the log from the debug port: [quote]Boot Ver1.3 UPLOAD_IDLE WIZ14X Ver1.0<<< [Date:2010.4.5] W5300 Init Get Config: Addr = 803f800 Config = 15dc0800 Restarted normally Setting Network Information => Local MAC Address Setted => Subnet Mask Setted => Gateway Address Setted => Local IP Address Setted Listen[CH0] 0 Listen[CH1] 0 Listen[CH2] 0 Listen[CH3] 0 Invalid Msg Recv Invalid Msg Recv Invalid Msg Recv [/quote] I click the Search button three times and each time the Invalid Msg Recv is sent out the debug port.

jameskim · Answer

Hi, In case of having multiple IP address in your computer, you can get “Invalid Msg Recv” when searching WIZ140SR. First, [color=#FF0000]eliminate other IP addresses except one IP address [/color]from your computer. Then, Click “Search” on your WIZ140SR configuration tool. I think you can get a board information on the Configuration tool without “Invalid Msg Recv”. Thank you. javakys