Wiz750sr TTL - Set IPv4 settings over HTTP Post /set_devinfo.cgi

Question

I need to use bitfocus companion to update my wiz750sr IP address and gateway. My issue is that the Wiz750sr TTL v1.41 web server on port 50003 doesn’t set the info. I can get info, but if I modify anything and click set, the device resets but the new IP settings are not applied. So when I send my command from companion it looks like it worked but it doesn’t. I need to verify why the web server didn’t work. I can update them on Config Tool, but I can’t rely on people having laptops. companion I send a HTTP Post to URL: 10.127.127.13:50003/set_devinfo.cgi Body: devname=wiz750sr&dhcp=0&ip=10.127.127.13&sub=255.255.255.0&gw=10.127.127.1&dns=0.0.0.0 Header: {“ISAJAX”:”yes”} Content Type: application/x-wwe-form-urlencoded JSON: None

Aimee0 · Answer

Hello, First, could you please confirm whether the same issue occurs when changing the configuration directly through a web browser such as Chrome or Edge, without using an external tool like Bitfocus Companion? Additionally, based on the information you provided, the IP address used in the URL (10.127.127.13) and the IP value included in the request body (ip=10.127.127.13) are set to the same address. The IP address in the URL is used to access the module’s current IP. The ip parameter in the request body specifies the new IP address to be applied. If the current IP and the new IP are identical, the device may internally determine that no configuration change has occurred and therefore may not save the settings. For testing purposes, we recommend modifying the ip value in the request body to a different address (for example, 10.127.127.50) and trying again.