[WizFi250] Station 모드로 접속한 이후 상태가 궁금합니다~
Wireless
No replies yet. Be the first to reply.
Join the discussion.
Wireless
No replies yet. Be the first to reply.
Join the discussion.
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
RE: [WizFi250] Station 모드로 접속한 이후 상태가 궁금합니다~
by wizdaniel ·
안녕하세요
소켓 연결하실 때 사용하신 SCON 명령의 마지막 파라메터를 '1’로 설정하면 데이터 모드로 동작하게 됩니다.
데이터 모드는 설명해주신대로, 시리얼 데이터를 모두 wifi로 전송하는 모드입니다.
모드에 대한 설명은 아래를 참고해주세요
https://wizwiki.net/wiki/doku.php?id=products:wizfi250:wizfi250pg:start#plugin_include__products__wizfi250__wizfi250pg__at_command_set-cmd_data_mode
데이터모드에서 다시 AT 명령을 사용하기 위해서는 '+++'를 입력하시면 됩니다.
Station모드에서 AP모드로 다시 동작하려면, WLEAVE 이후에 다시 AP 모드 설정을 하고 WJOIN하시면 됩니다.
https://wizwiki.net/wiki/doku.php?id=products:wizfi250:wizfi250pg:start#ap_mode_using_wpa2_static_ip