AT+WEAP How do you use this command?

Question

Hello everyone, Some one know how use this command AT+WEAP ? I understand that using this command places a certificate on the wifi. On a wireless computer we will set the configuration as well: Security: WPA2-Enterprise - Encryption Type : AES Network authentification : EAP (PEAP) Settings : no validate server certificate + MSCHAP v2 Authentification Method: EAP-MSCHAP v2 Advanced Settings: 802.1x specify authentification mode: User authentificaction I don’t know if the certificate is necessary for this. I am using: AT+WD AT+WS AT+WM=0 AT+WAUTH=0 AT+NDHCP=0 AT+NSET= IP fix,subnet mask,gateway AT+WSEC=16 I dont know if this necesary AT+WEAPCONF=25,26,domain\user_id,user_password OR 25,26,user_id,user_password AT+WA=Wireless_Lan_name [ERROR] Thanks.

irina · Answer

Hi, manzanazo ! In case of using AT+WEAP command, your H/W should be Rev1.01. You can checkt this in WizFi210 Programmer’s Guide 2.1.15. section. Best Regards, Tom.