WiZFi630 / 630 problem

Question

Namely, I have a module WizFi630 from WIZNET company, driven by a microcontroller through UART, which probably by improper setting has been seized. Although it generates a signal (it is working in Access Point mode) and I connect by the laptop to the wireless network, when I trying to open the address 192.168.16.254, I can not open the module menu and there is no connection. The same happens when I connect the module be Ethernet with my laptop. Is it possible to reset the unit to factory settings, and how to do it ? Where can I get information on that issue? I have one more problem with the module WizFi630A. When connect to it and set up the link (with address 192.168.1.1) it provide me an access to OpenWrt menu, but I can not open it and set up the UART connection. When I connect the module working with a microcontroller using an Ethernet cable and I trying to connect with 192.168.1.1 adress usin web browser, the menu is not acessible. What am I doing wrong? Or where can I get the information I need?.." Kind Regards, Pawel.

cliff · Answer

Hello, I will send you guidance document about WizFi630 to your registered e-mail. I suppose it can be helpful to your problem. Thanks, regards.