Skip to content

How to Implement UDP and TCP Datapaths with W5500 on an FPGA?

This educational FPGA project describes a Verilog driver that operates the WIZnet W5500 in UDP, TCP-client, and TCP-server modes.

chen

Published July 24, 2026

Original author: dream131214Original source (new tab)

How to Implement UDP and TCP Datapaths with W5500 on an FPGA?

Project description

How to Implement UDP and TCP Datapaths with W5500 on an FPGA? Summary This educational FPGA project describes a Verilog driver that operates the WIZnet W5500 in UDP, TCP-client, and TCP-server modes. The FPGA controls W5500 registers and socket buffers through a high-speed SPI datapath, while the W5500 supplies the 10/100 Ethernet MAC, PHY, hardwired TCP/IP engine, eight hardware sockets, and 32 KB of packet memory. The design is useful for studying how hardware state machines move application data through TCP and UDP sockets without implementing a complete native Ethernet stack inside the…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like