Skip to content

How to Build an HTTP Client with WIZnet W5500 on ESP32 MicroPython?

This education-focused project shows how to build a wired Ethernet HTTP client using WIZnet W5500 on an ESP32 running MicroPython.

chen

Published June 19, 2026

Original author: 爽新全效瓷兔膏Original source (new tab)

How to Build an HTTP Client with WIZnet W5500 on ESP32 MicroPython?

Project description

How to Build an HTTP Client with WIZnet W5500 on ESP32 MicroPython? Summary This education-focused project shows how to build a wired Ethernet HTTP client using WIZnet W5500 on an ESP32 running MicroPython. The ESP32 controls W5500 over SPI, writes network and socket registers, configures a TCP client socket, and sends lightweight HTTP GET requests through W5500’s hardware TCP/IP engine. W5500’s role is to provide the Ethernet MAC/PHY, TCP/IP offload, socket state machine, and internal packet buffering so learners can study embedded Ethernet communication without implementing a full TCP/IP…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like