flipper [W5500] Ethernet App

Flipper Zero Ethernet Troubleshooter
This is a small helper that lets you connect your Flipper via RJ45 to your network

bruno

Published December 31, 2025

190 UCC

15 WCC

41 VAR

1 Followers

Original author: karaseviaOriginal source (new tab)

Project description

Summary The ETH Troubleshooter application extends the Flipper Zero multi-toolby enabling users to test and diagnose Ethernet connections throughan external Ethernet interface module. In this setup,the Flipper Zero acts as a portable diagnostic controller, allowing users to interact with network hardware, verify connectivity, and simplify field troubleshooting.The project demonstrates how a handheld devicecombined with a simple app interface can provide convenient network diagnostics without requiringa full laptop or dedicated testing equipment. What theProject Does Flipper Zero is a compact…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

TI DSP28377D + W5500 HW

Inverter + W5500

jaden

Views 34
Comments 0

ESP-WiFiWatch passively scans neighbors' Wi-Fi for sudden outages while WIZnet's W5500 Ethernet handles all management, keeping the monitor independent of what

How Do You Detect a Power Outage by Listening to Your Neighbors' Wi-Fi? - WifiWatch

irina

Views 38
Comments 0

Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b

CANary

Sunny_

Views 18
Comments 0

SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.

SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English

sophia

Views 35
Comments 0

A 600W USB-C PD power distribution system for 10-inch racks, featuring W5500-based Ethernet for remote monitoring and control.

HW_PDNode-600-Pro

Lihan__

Views 32
Comments 0

ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.

W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems

jakelee

Views 147
Comments 0

This project targets an embedded machine-vision architecture in which an OV2640 camera captures image data and an MCU forwards that data over wired Ethernet usi

How to Capture OV2640 Images and Transport Them over Ethernet with W5500 for Machine Vision?

Arnold

Views 43
Comments 0