WIZNET W5500S2E-R1 Ethernet to Serial Converter, Modbus TCP
W5500S2E-R1 uses the hardwired TCP/IP protocol Ethernet chip W5500. This enable a faster, stable and secure Ethernet connectivity.
2
Similar projects you might like
ESPHome AwoX BLE Mesh Hub connects AwoX/EGLO devices to Home Assistant using ESP32-S3 BLE Mesh and W5500 Ethernet for MQTT connectivity.
EspHome-AwoX-BLE-mesh-hub
irina-
Views 58
-
Comments 0
HCV Ethernet Edition: A CAN-to-MQTT Adapter for Viessmann Heat Pumps Using ESP32 and W5500
HCV Ethernet Edition: A CAN-to-MQTT Adapter for Viessmann Heat Pumps Using ESP32 and W5500
Aimee0-
Views 53
-
Comments 0
ESPHome firmware for an ESP32-S3 + W5500 + LD2450 sensor that tracks up to three targets in polygon zones and reports to Home Assistant over wired Ethernet.
Sensy-One E1: Wired-Ethernet mmWave Presence Sensor for Home Assistant on ESP32-S3 and W5500
josephsr-
Views 135
-
Comments 0
K.A.R.R. Safety Core: ROS 2 Robot Safety Control and Ethernet Monitoring System Using ESP32-S3 and W5500
K.A.R.R. Safety Core: ROS 2 Robot Safety Control and Ethernet Monitoring System
Aimee0-
Views 53
-
Comments 0
WittelB turns Modbus RS485 devices into Ethernet endpoints with W5500, DIN-rail packaging and a local interface for configuration and register checks.
How Does WittelB WIN-CN-1M-1TCP Use W5500 to Connect Modbus RS485 Devices?
Benjamin-
Views 43
-
Comments 0
KinCony AIO Hybrid combines W5500 Ethernet, five manual relay overrides, analog I/O and Tuya interfaces, with current KCS firmware and ESPHome examples.
How Does W5500 Connect the KinCony AIO Hybrid to a Mixed Home Automation System?
Benjamin-
Views 40
-
Comments 0
Apollo CAST PRO-1 streams line-level audio to Music Assistant over built-in W5500 Ethernet, with optical output and Wi-Fi in one ESPHome device.
How Does W5500 Bring Analog Audio into Sendspin on Apollo CAST PRO-1?
Benjamin-
Views 64
-
Comments 0