Boxy Smart-room controller
Boxy Smart-room controller
0
Components
Hardware components
teensy - Teensy USB 3.2 Development Board
x 1
Generic BME280
x 1
Elegoo GY-521
x 1
Sparkfun Rg encoder
x 1
Adafruit NeoPixel Ring 12pixel
x 1
WIZnet850io
x 1
SparkFun Pushbutton switch 12mm
x 1
Adafruit 128x64 Monochrome Oled Display
x 1
Arduino - Arduino IDE
x 1
Project description
Project Story Some of the requirements for the project initially were to use multiple SPI devices, which the Redboard can not achieve, so in this project Teensy 3.2 is used.I had wanted each to be able to control the color of the NeoPixel ring and then push that color to the hue lights with two different buttons that each had multiple uses.I had decided I wanted 3 sensors: the BME280, the R/G encoder, and the Elegoo GY-521 (an accelerometer and gyro combo sensor).I was assigned a mid-term project to create a smart-room controller that either controlled Phillips Hue lights or Wemo smart…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
