Skip to content

DNS Error 202 over ETH with W5500

The user is using an ESP32-S3-WROOM-1 with a W5500 Ethernet module and the goal is to perform HTTPS POST requests and run a web server over Ethernet.

andrew

Published September 18, 2025

Original author: Sunset DaydreamOriginal source (new tab)

DNS Error 202 over ETH with W5500

Project description

What the User Did The user is using an ESP32-S3-WROOM-1 with a W5500 Ethernet module (via SPI) on a “lite dev board.” Main goal: perform HTTPS POST requests and run a web server (also toggling an LED), over Ethernet instead of WiFi. ⚠ Problem Observed Ethernet connection seems to work at a basic level: Link UP, IP is assigned (192.168.0.20) Gateway, mask, etc. correct. But when attempting to resolve DNS (e.g. www.utr-control.com), they get “DNS resolution failed, error code: 202”. The HTTP POST fails because DNS can’t resolve the hostname. Additional Details The user uses static IP…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like