Web Relay Board with Solid State Relays & Web Page Interface

COMPONENTS

PROJECT DESCRIPTION

introduction

Industrial Quality Ethernet Relays
Available with 1, 2, 4, or 8 On-Board Relays
Available with Solid State Relays
ProXR Command Set Used by Industry for Many Years
Supports Windows, Mac, Linux, and Android
Supports LabVIEW and Visual Studio
TCP Socket or Virtual Serial Port Communications
Use NCD Base Station Software to Learn Commands

features

Ethernet Relays from NCD

Our Ethernet Relay boards makes it easy for computers of all types to control relays and monitor analog inputs. Ethernet Relays allow you turn relays on or off, flash relays continuously, control relays for a duration of time, and control relays in groups using a cross-platform compatible Ethernet interface. This Ethernet Relay is a ProXR Lite series controller which is a widely adopted standard used by industry for many years. Equipped with your choice of 1, 2, 4, or 8 on-board relays, the ProXR Lite series Ethernet Relays suit the needs of most of our customers. Integrated Analog to Digital Converters may be used to manually control the relays, or they may be used to read external sensors. Equipped with 8 or 10-Bit resolution, the ADC built into each Ethernet Relay board adds tremendous flexibility for various application requirements. Ethernet relays support DHCP or a Static IP address with a programmable port number, 2101 is used by default. NCD Ethernet communications module will transmit the IP address of the device using periodic UDP broadcasts, which make it easy to locate the device on a network.

Getting Started with NCD Ethernet Relay

Start by downloading Base Station at https://ncd.io/start and Run the application. A window will appear which listens for all NCD UDP broadcasts. Plug in your Ethernet Relay Board and wait for the Network window to populate with the IP address of the Ethernet Relay Board. Simply click the IP address of the device and “OK” to establish a connection. Base Station is a tool designed to teach you all the features built into your controller and provide you with example commands. Base Station was written for Windows using Visual Studio (source code available on the download page linked above). Base Station shows you all the commands you need for controlling relays and monitoring external sensors.

New Version Now Shipping

Beginning Late 2020, we’ve made some updates to this product to make it better with increased component count while maintaining the same functionality and footprint. The New Rev G2 Series adds a better power supply circuit to improve noise immunity while providing increased power to the communications socket. We also improved the relay drive circuit to better handle inductive loads. We also changed the color of the circuit board to Black and updated the branding to ncd.io with updated logos. This is the same product you have been buying for years, but now with improved electronics and while maintaining the same footprint as the original design. Most importantly, this is now a Legacy product, which means it will never go obsolete as long as critical parts are still available to us. Built with our new high-speed pick and place assembly line, we can complete the surface mount assembly process at a rate of several thousand units per day with the potential to scale to any volume you could imagine, so you never need to worry about supply quantities or supply chain problems. Please note that it was necessary for us to remove the integrated temperature sensor in select versions of this product. This sensor was providing incorrect readings if the relays were active for extended periods of time. We can help you with an off-board sensor if needed.

Updated Features

Updated Logos and Branding, Changed PCB Color to Black
Improved Relay Drive Circuit for Greater Noise Immunity
Improved Power Supply Circuit
- Switcher Regulator for Lower Heat and Higher Power
- Adds Compatibility with NCDD5500 Ethernet Module
- Adds Compatibility with WiFi/Bluetooth Module
Use MQTT to Talk to this Device via WiFi Module
Use Integrated Web Page when using our New Ethernet or WiFi Module
Added Zip Tie Holes to Secure Communications Module
New Option for Pluggable Connectors on the Analog Inputs
Ferrite Beads for Improved Noise Separation of Logic and Drive Circuits
Updated LEDs to Address Supply Chain Limitations
100% Identical Firmware with No Changes for Drop In Compatibility
99% Identical Shape – Only Slight Changes to Connector Positioning
Built by our High-Speed Pick and Place Machine for High-Volume Runs
Legacy Status Product – Will Not Become Obsolete
Removed Temp. Sensor from Select Versions due to Errant Readings

Base Station Software

Base Station Software was designed to help you learn the ProXR command set. Explore ProXR features using our Graphical User Interface. Watch data bytes flow to and from the board, so you easily understand the command execution process. There is no faster or easier way to learn how to automate than Base Station, as it was designed to work with our complete array of communication modules, including Wireless, Ethernet, USB, RS-232, and many more. You only need a Windows 8 or 10 Computer to Run Base Station. Base Station was written in Visual Studio, and we even provide the source code to help you on your way! Learn More about Base Station Software Here.

https://oldmaker.wiznet.io/wp-content/uploads/2022/03/ProXR-Example-Image-300x195.png

AD8 8-Channel 8/10-Bit Analog to Digital Converters

his controller is equipped with 8-Channels of 8/10-Bit Analog to Digital Converters, capable of reading analog voltages from 0 to 5 Volts DC. The ADCs on this controller allow monitoring of external sensors or contact closure input detection. Connect external temperature sensors, light sensors, current sensors, buttons, switches, or anything else that generates a 0-5VDC analog or contact closure output. With 8-bit resolution, analog inputs will convert 0-5 Volt signals into a value from 0 to 255. With 10-bit resolution, values of 0 to 1023 may be measured. Input resolution is software selected. Simply ask the controller for the analog value of each input, and the controller instantly responds.

https://oldmaker.wiznet.io/wp-content/uploads/2022/03/ProXR-ADC-1-300x133.png

Relay Activator and Analog Inputs

The Relay Activator control panel allows analog inputs to directly control relays. Simply connect the analog inputs to buttons or switches and trigger basic relay on or off functions to take manual control of the on-board relays. The Relay Activator control panel allows you to define 8 functions for each of the 8 inputs. Functions include turning relays on or off, toggling the state of relays, momentarily flash a relay, momentarily toggle the flashing function of a relay, turn all relays on, turn all relays off, and push notification events. When push notification events are configured, the controller generates a packet of data every time the inputs change state.

https://oldmaker.wiznet.io/wp-content/uploads/2022/03/AD8-Relay-Activator-2-300x198.png

Documents

Comments Write