Skip to content

Golioth Hello sample using Ethernet

This shows how to use Ethernet with Golioth. The code is based on the stock Golioth Hello sample that demonstrates

WIZnet

Published February 07, 2023

Original author: goliothOriginal source (new tab)

Golioth Hello sample using Ethernet

Project description

Overview This shows how to use Ethernet with Golioth. The code is based on the stock Golioth Hello sample that demonstrates how to connect with Golioth and publish simple Hello messages. The addition of a DHCP request in main, using the net_if.h include, is the only substantive difference from the hello sample. The following have been tested and are working at: nRF52840 DK manually wired to a W5500 (ETH Wiz Click) STM32F405 (Sparkfun STM32 Thing+) wired to a W5500 (ETH Wiz Click) NXP MIMXRT1060-EVKB which has onboard Ethernet Requirements Golioth credentials Ethernet Building and Running…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.