Ethernet module with W5500 chip for Arduino
This is an Ethernet network module with a W5500 chip that communicates via SPI interface, has a built-in TCP/IP stack supporting various protocols
Description :
This Ethernet network module features the W5500 chip and utilizes SPI communication. It includes a built-in TCP/IP stack, supporting TCP/IP, UDP, ICMP, ARP, IGMP, and PPPoE protocols. The module offers Wake on LAN over UDP functionality, supports up to 8 simultaneous sockets, and has a 32 KB internal memory buffer. It operates at an 80MHz speed and employs power-saving features like Wake on LAN (WOL) and shutdown mode. The board also provides a MicroSD card slot and two standard Grove ports (I2C and UART). It works with 3.3V or 5V voltage and includes LED status indicators. The module's dimensions are 69 x 52 mm, and comprehensive documentation with examples is available on the product wiki page.
Here are the specifications for the Ethernet network module with the W5500 chip: Communication Interface: SPI
Supported Protocols: TCP/IP, UDP, ICMP, ARP, IGMP, PPPoE
Simultaneous Sockets: Up to 8
Internal Memory Buffer: 32 KB
Ethernet Physical Layer: Built-in 10BaseT/100BaseTX (PHY)
Auto-Negotiation Support: Yes Power-over-Ethernet (PoE)
Power: Up to 12W (VIN port can output 12V/1A)
Voltage: 3.3V or 5V
Status Indicators: LED status indicators
Connectors: Two Grove connectors (I2C and UART)
MicroSD Card Slot: Yes
Dimensions: 69 x 52 mm