CANary
Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b
0
Similar projects you might like
AUPINS AC-EDC connects EV chargers to OCPP management systems via W5500 Ethernet, Wi-Fi, or 4G. Explore its features, network options, and integration needs.
AC-EDC / AC / OCPP Module Charging Pile Controller Series
matthew-
Views 11
-
Comments 0
A prototype actuator test bench where an STM32 NUCLEO-F446RE uses a WIZ550IO (W5500) as a Modbus TCP server for a CLICK PLUS PLC, plus a Python HMI.
Aircraft Actuator Test Platform: STM32 and W5500 Modbus TCP Link to a CLICK PLC
josephsr-
Views 16
-
Comments 0
Tripwire Firmware extends Batear with new node roles, XIAO hardware support, relay-aware packets, and W5500 Ethernet for flexible drone detection networks.
Tripwire Firmware: Extending Batear with New Nodes and Relay-Aware Communication
irina-
Views 17
-
Comments 0
An STM32F401 Tracking Box decodes serial/RS-485 camera and lens data, generates Free-D packets, and sends them over Ethernet through a WIZnet W5500.
Broadcast Camera Tracking Gateway: STM32F401 and W5500 Free-D Tracking Box
josephsr-
Views 15
-
Comments 0
Firefly Luciferin: A Real-Time Ambient Lighting System Using ESP32 and W5500 SPI Ethernet
Firefly Luciferin: A Real-Time Ambient Lighting System Using ESP32 and W5500 SPI Ethernet
Aimee0-
Views 17
-
Comments 0
RP2040-based GNSS system using W5500 TCP sockets to stream corrected NMEA data and diagnostics for Dynatest FWD measurement equipment.
TCP-FWM-GPS: RP2040, W5500 and High-Accuracy GNSS for Dynatest FWD
irina-
Views 18
-
Comments 0
A Raspberry Pi Pico and W5500 monitor mains presence over SNMP, with loss/restore traps, LibreNMS integration and a PoE carrier design.
RF-UPS-Monitor: Mains Power Monitoring with RP2040 and W5500
Lihan__-
Views 30
-
Comments 0