[NEWS] End Your Network Worries! Meet 'Tempo'—ESP32-powered IoT Device Enhanced by WIZnet's W5500

CiferTech's Tempo: Enhancing IoT Edge Computing with ESP32 and WIZnet W5500

Alan

Published March 19, 2025

Project description

CiferTech TEMPO IoT Edge Device: In-Depth Analysis TEMPO is an IoT edge device developed by CiferTech that combines an ESP32 microcontroller with a WIZnet W5500 Ethernet chip and various sensors (like a DHT22 temperature/humidity sensor) . As an edge node, TEMPO collects data from its sensors and uses the W5500 to facilitate reliable communication between the device and the internet (with a router or mobile hotspot acting as the network gateway) . This analysis examines why the W5500 was chosen for the project, how it interfaces with the ESP32, the performance benefits it provides, the…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

A GPS 1 PPS pulse disciplines an ESP32-S3 clock to ~5 µs; the W5500 SPI Ethernet path is timestamped so LAN clients see 60–100 µs.

ESPHome GPS/PPS Stratum-1 NTP Server on ESP32-S3 with a W5500 Ethernet Timestamping Path

josephsr

Views 28
Comments 0

Rently's UL294 access panel for rental communities combines Wi-Fi, LTE-M, and BLE with a WIZnet W5500 that gives it a wired 10/100 Ethernet path to the cloud.

How Does the Rently Access Panel with Intercom Use W5500 for Wired Cloud Access Control?

ElenaLee

Views 24
Comments 0

Newsan Lab's ArchiNet adds W5500 wired Ethernet plus ESP32-S3 Wi-Fi/BLE to its mass-produced ARCHI RP2040 education board, with open KiCad files.

ArchiNet: Newsan's W5500 Ethernet and ESP32-S3 Connectivity Board for the ARCHI RP2040 Platform

ElenaLee

Views 35
Comments 0

TI DSP28377D + W5500 HW

Inverter + W5500

jaden

Views 31
Comments 0

ESP-WiFiWatch passively scans neighbors' Wi-Fi for sudden outages while WIZnet's W5500 Ethernet handles all management, keeping the monitor independent of what

How Do You Detect a Power Outage by Listening to Your Neighbors' Wi-Fi? - WifiWatch

irina

Views 36
Comments 0

Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b

CANary

Sunny_

Views 16
Comments 0

SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.

SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English

sophia

Views 33
Comments 0