---
title: "Iarduino Ethernet Shield W5500"
url: "https://maker.wiznet.io/wiz_chandana/resellers/iarduino-ethernet-shield-w5500/"
markdown_url: "https://maker.wiznet.io/wiz_chandana/resellers/iarduino-ethernet-shield-w5500/md"
type: "VAR: Value-Added Reseller Products"
author: "iarduino.ru"
author_url: "https://iarduino.ru/shop/Expansion-payments/ethernet-shield-w5500.html"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "iarduino.ru"
original_url: "https://iarduino.ru/shop/Expansion-payments/ethernet-shield-w5500.html"
published: "2022-11-08"
language: "en"
likes: 1
views: 1136
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Iarduino Ethernet Shield W5500

> Iarduino Ethernet Shield W5500 is an expansion board that allows you to remotely connect Arduino boards to an Ethernet network

Original author: iarduino.ru (source: https://iarduino.ru/shop/Expansion-payments/ethernet-shield-w5500.html)

## Article

## **General information**Ethernet Shield W5500 is an expansion board that allows you to remotely connect Arduino boards to an Ethernet network, and therefore to the Internet (if connected).

[Embedded media](https://www.youtube.com/embed/Hi_NZMjEct8)

Characteristics :

Supply voltage: 5V;
Interface: SPI;
Network protocols: TCP, UDP;
Network interfaces: 10Mbps / 100Mbps;
Internal buffer size: 32 kB;
Operating modes: duplex / half duplex;
LED indication;
Connection
The board is installed on top of the Arduino, which communicates via the SPI bus. The pins used to connect to the bus are: 10, 11, 12, 13.

The SS pin assigned to pin 10 can be reassigned by simply opening the jumper opposite pin 10 and a comma opposite the one you want.

Connection instructions.

To work with the Ethernet Shield W5500 , we suggest using the standard Arduino IDE library - Ethernet.h

Power source :
The module is powered by 5V.

Equipment
1x Ethernet Shield W5500;

Links
<https://wiki.iarduino.ru/page/wiki-ethernet-shield-w5500/>

---

Source: https://maker.wiznet.io/wiz_chandana/resellers/iarduino-ethernet-shield-w5500/