---
title: "ARDUINO NETWORK MODULE COMPATIBLE UNO MINI W5100 ETHERNET"
url: "https://maker.wiznet.io/wiz_chandana/resellers/arduino-network-module-compatible-uno-mini-w5100-ethernet/"
markdown_url: "https://maker.wiznet.io/wiz_chandana/resellers/arduino-network-module-compatible-uno-mini-w5100-ethernet/md"
type: "VAR: Value-Added Reseller Products"
author: "Starware"
author_url: "https://tienda.starware.com.ar/producto/modulo-red-arduino-compatible-uno-mini-w5100-ethernet/"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Starware"
original_url: "https://tienda.starware.com.ar/producto/modulo-red-arduino-compatible-uno-mini-w5100-ethernet/"
published: "2022-09-06"
language: "en"
hardware: ["WIZnet W5100S"]
likes: 4
views: 2019
comments: 1
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# ARDUINO NETWORK MODULE COMPATIBLE UNO MINI W5100 ETHERNET

> ARDUINO NETWORK MODULE COMPATIBLE UNO MINI W5100 ETHERNET. The W5100 MINI module is a single chip ethernet interface, with built-in 10/100 M

Original author: Starware (source: https://tienda.starware.com.ar/producto/modulo-red-arduino-compatible-uno-mini-w5100-ethernet/)

## Components

- **WIZnet W5100S** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5100S))

## Article

![](https://maker.wiznet.io/upload/ckeditor5/739907422%5F1662438366%2EPNG)

The W5100 MINI module is a single chip ethernet interface, with built-in 10/100 MBPS internal Ethernet control, mostly used in high integration, high stability and performance embedded system projects.

#### **Description**

The W5100 MINI module is a single-chip ethernet interface, with integrated internal Ethernet control 10/100 MBPS, mostly used in embedded system projects of high integration, high stability and performance.

#### **Technical care**

– Multiple interfaces: direct bus, indirect bus and SPI
bus – Hardware support TCP/IP protocol, supports TCP, UDP, ICMP and –
IGMP, IPv4, ARP, PPPoE.
– Up to four independent ports.
– Internal integration 16 Kbyte of cache for receiver buffer.
– Wide variety of LED status indicators: RX and TX, Full/duplex, Collision, Link,
speed
– Compatible with auto-polarity (DMI/MDIX)
– 3.3 V power, Digital inputs and outputs compatible with 5V
– Ethernet connector included, double row 2*14 2.0mm pin
– Size: 5.2x3x1.5 cm (length x width x height)

#### **Contents**

1x SHIELD BOARD MINI W5100

---

Source: https://maker.wiznet.io/wiz_chandana/resellers/arduino-network-module-compatible-uno-mini-w5100-ethernet/