---
title: "Mons2015 LED Screen ElectroSuper"
url: "https://maker.wiznet.io/wiz_chandana/projects/mons2015-led-screen-electrosuper/"
markdown_url: "https://maker.wiznet.io/wiz_chandana/projects/mons2015-led-screen-electrosuper/md"
type: "UCC: User Created Content"
author: "Yann Guidon"
author_url: "https://hackaday.io/project/6954/components"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Yann Guidon"
original_url: "https://hackaday.io/project/6954/components"
published: "2022-11-08"
language: "en"
likes: 4
views: 1129
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Mons2015 LED Screen ElectroSuper

> The installation saw the WizYasep's first deployment .

Original author: Yann Guidon (source: https://hackaday.io/project/6954/components)

## Article

DESCRIPTION :

A HUGE hardware and software project is installed during 2015 at the railway station of Mons in Belgium.

Fred Sapey-Triomphe installed a 168m² LED screen that shows videos and interacts with the passengers' flow with passive sensors.

YGDES/Yann Guidon designed and installed all the electronics and software (C/VHDL). A special motherboard for the WizYasep extends its features to provide 20 asynchronous outputs and sequence the power of 4 blocks of PSUs. All video data are streamed through a 100Mbps Ethernet network.

https://www.youtube.com/watch?v=zgpFfJ7wklg

COMPONENT USED :
1 × Raspberry Pi B+
1 × RTC module
keeps the RPi synched
1 × Ethernet hub
1 × 5V power supply
for the hub & Pi
4 × PIR sensors
6 × WizYasep controller boards
converts UDP to RGB LED asynchronous serial streams
6 × WizYasep extension boards
provides 12 more channels and power sequencing
120 × 150W Power supplies
16800 × RGB LED balls

![](https://maker.wiznet.io/upload/ckeditor5/146330282%5F1667885649%2Ejpg)

- Headers (2,54mm pitch) : Wiznet, JTAG, X (9 GPIO @3.3V, 16 bits data bus, 10 bits adress), Y (8 5V outputs), Z (8 GPIO @3.3V, shared with the serial/SPI console and external reset)

- Ethernet : Wiznet module ([WIZ830MJ](http://www.wiznet.co.kr/product-item/wiz830mj)) with a [W5300](http://www.wiznet.co.kr/product-item/w5300/) controller chip (PHY, MAC, 128Ki bytes of buffer, hardwired IP, ARP, TCP, UDP...)

- FPGA : [Actel/Microsemi ProASIC3](http://www.microsemi.com/products/fpga-soc/fpga/proasic3-e#product-tables) A3P250-VQ100 (6144 logic gates, 8 dual port SRAM blocks (512 bytes each), PLL, 68 I/O pins...)

![](https://maker.wiznet.io/upload/ckeditor5/146330282%5F1667885657%2Ejpg)

---

Source: https://maker.wiznet.io/wiz_chandana/projects/mons2015-led-screen-electrosuper/