---
title: "Hack Neutrogena LED Mask and upload it to the Cloud"
url: "https://maker.wiznet.io/wiz_chandana/projects/Hack-Neutrogena-LED-Mask-and-upload-it-to-the-Cloud/"
markdown_url: "https://maker.wiznet.io/wiz_chandana/projects/Hack-Neutrogena-LED-Mask-and-upload-it-to-the-Cloud/md"
type: "UCC: User Created Content"
author: "wiz_chandana"
original_author: "wiz_chandana"
original_url: "https://gongdol22.tistory.com/22"
published: "2022-08-01"
language: "en"
hardware: ["WiArduino MEGA WiFi?", "WIZnet WizArduino M0 ETH"]
likes: 0
views: 154
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Hack Neutrogena LED Mask and upload it to the Cloud

> Hack Neutrogena LED Mask and upload it to the Cloud

Original author: wiz_chandana (source: https://gongdol22.tistory.com/22)

## Components

- **WiArduino MEGA WiFi?** x 1
- **WIZnet WizArduino M0 ETH** x 1 ([docs](https://docs.wiznet.io/Product/Open-Source-Hardware/wizarduino_m0_eth_eng))

## Article

For H/W,? [WizArduino M0 ETH](http://shop.wiznet.co.kr/front/contents/product/view.asp?cateid=90&pid=1271) of WIZnet and [WizArduino MEGA WIFI](http://shop.wiznet.co.kr/front/contents/product/view.asp?cateid=90&pid=1289) development board were used. First, disassemble the activator to make it into a PCB state, turn power and R1, and connect it to the IO pin of WiArduino MEGA WIFI. Then, connect D8 and GND of WizArduino MEGA WIFI and WizArduino M0 ETH, and connect GND of the PCB rolling to A2 pin of WizArduino M0 ETH. The role of WizArduino M0 ETH is to automatically turn on when a mask is attached to the face using the Touch Key.

| activator? | ?WiArduino MEGA WiFi | ? WizArduino M0 ETH |
| --- | --- | --- |
|  | ?D8 | ?D8 |
| ?R1 | ?D11 |  |
|  |  | ?A2 (Touch Key) |
| ?GND | GND? | GND? |

출처: <https://gongdol22.tistory.com/22> [WIZnet 공돌이는공돌공돌:티스토리] It turns on automatically when the mask is mounted, and turns off according to the set cycle of F/W. At this time, 1 is added to Ubidots Cloud to record. ![](https://t1.daumcdn.net/cfile/tistory/99BAAF385C47FD8430) Diagram is as below. ![](https://t1.daumcdn.net/cfile/tistory/9977D4375C62853A06)

---

Source: https://maker.wiznet.io/wiz_chandana/projects/Hack-Neutrogena-LED-Mask-and-upload-it-to-the-Cloud/