---
title: "ETHERNET with ATSAM and WIZNET W5500"
url: "https://maker.wiznet.io/wiz_chandana/projects/ETHERNET-with-ATSAM-and-WIZNET-W5500/"
markdown_url: "https://maker.wiznet.io/wiz_chandana/projects/ETHERNET-with-ATSAM-and-WIZNET-W5500/md"
type: "UCC: User Created Content"
author: "wiz_chandana"
original_author: "wiz_chandana"
original_url: "https://ondrashova-automatizace.webnode.cz/"
published: "2021-03-02"
language: "en"
hardware: ["MCU ATSAM3X8E"]
likes: 0
views: 443
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# ETHERNET with ATSAM and WIZNET W5500

> ETHERNET with ATSAM and WIZNET W5500

Original author: wiz_chandana (source: https://ondrashova-automatizace.webnode.cz/)

## Components

- **MCU ATSAM3X8E** x 1
- Software: **Packet sender**

## Documents and links

- [Link for FreeRTOS + Wiznet 5500 project](https://uloz.to/!emK8kcpncE7Y/freertos-rar) (code)

## Article

The video below? describes the? project of communication between MCU ATSAM3X8E and PC on Ethernet site. On PC I used program called "Packet sender", that sending ASCII characters to device with own IP address and number of scoket port. Communication in video is TCP. Program for MCU is created in Atmel Studio 7 and ASF, for programm of MCU was used Atmel ICE programmer with JTAG debug. https://www.youtube.com/watch?v=2SIYvFqQGM0&feature=emb_title

---

Source: https://maker.wiznet.io/wiz_chandana/projects/ETHERNET-with-ATSAM-and-WIZNET-W5500/