---
title: "Esp32-Stick-Eth-Cam"
url: "https://maker.wiznet.io/viktor/resellers/esp32-stick-eth-cam/"
markdown_url: "https://maker.wiznet.io/viktor/resellers/esp32-stick-eth-cam/md"
type: "VAR: Value-Added Reseller Products"
author: "Prokyber"
author_url: "https://www.tindie.com/products/allexok/esp32-stick-eth-cam/"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Prokyber"
original_url: "https://www.tindie.com/products/allexok/esp32-stick-eth-cam/"
published: "2023-11-06"
language: "en"
hardware: ["WIZnet W5500"]
likes: 0
views: 3509
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Esp32-Stick-Eth-Cam

> Esp32-Stick-Eth-Cam

Original author: Prokyber (source: https://www.tindie.com/products/allexok/esp32-stick-eth-cam/)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Article

#### What is it?

This is an upgraded version of Esp32-Stick development board with the Ethernet support. The board also allows connecting a camera and uses Esp32-S3 chip.

#### Why did you make it?

It was made because the original Esp32-Stick boards lacked the camera support. Moreover it was impossible to handle both the camera and the Ethernet using classic vanilla Esp32 since both peripherals require a lot of pins. So we decided to build the upgraded board around Esp32-S3, which has much more pins and W5500 SPI Ethernet module.

#### What makes it special?

**Pin-to-pin compatibility with other Esp32-Stick-Cam boards, Camera and Machine Learning examples!**

- Ov2640 and Ov5640 Camera support.

- 36 Gpios(17 are not used by Ethernet or the camera)

- USB Type-C

- Esp32-Stick-Cam boards are fully programmable in Arduino and are supported in ESPHome home automation environment.

- No external USB-UART converter is required, ready for plug-and-play programming!

- All the Esp32-Stick-Cam boards have the same length and width so they can easily be replaced with one another.

- Any code written for one board is compatible with another because they share the same CPU and pinout.

#### Characteristics

- ESP32-S3-WROOM-1 (N16R8) with 16MB Flash, 8MB ram.

- USB-C connector.

- 36 Gpios(17 are not used by Ethernet or the camera).

- W5500 chip for the Ethernet.

- CH340G USB-UART converter.

- USER-Led(GPIO2).

- Reset button and User button(GPIO0).

- Accepts power through: USB, External source (3.3V-5V)

- the 3.3V branch(Ams1117) can provide 700mA of current.

#### Examples

- Basic Camera+Ethernet Platofrmio Example: https://github.com/allexoK/Esp32-Stick-Cam-Boards-Platformio

- Machine Learning tutorials are provided in pdf:

- https://github.com/allexoK/Esp32-Stick-Cam-Machine-Learning-Guides

#### Schematics

The schematics is available from the datasheet link here on Tindie

---

Source: https://maker.wiznet.io/viktor/resellers/esp32-stick-eth-cam/