Mạch ESP32 RS485 Modbus RTU TCP/IP Ethernet ZenoLAN0105
Mạch ESP32 RS485 Modbus RTU TCP/IP Ethernet ZenoLAN0105
matthew
Views 68

Comments 0
Value-Added Reseller products: ready-made products and boards from partners, built with WIZnet chips.
290 projects
Mạch ESP32 RS485 Modbus RTU TCP/IP Ethernet ZenoLAN0105
Mạch ESP32 RS485 Modbus RTU TCP/IP Ethernet ZenoLAN0105
matthewViews 68
Comments 0
PanaProxy-ETH combines ESP32-C3, W5500 Ethernet, ESPHome, and Home Assistant to locally monitor, control, and automate Panasonic Aquarea heat pumps.
PanaProxy-ETH: A W5500-Based Home Assistant Controller for Panasonic Aquarea Heat Pumps
matthewViews 95
Comments 0
Solar- or PoE-powered Remote ID receiver. Detects compliant drones up to twelve kilometres. Installs in under ten minutes. No radar. No cameras.
Tripwire. Know when drones enter your airspace.
AlanViews 109
Comments 0
16-channel relay controller from a small French Tindie shop, pairing an STM32F411RE (Cortex-M4) with a WIZnet W5500 that handles all TCP/IP/UDP in hardware.
Ethernet 16-Relay Board: An STM32 + W5500 Controller With DIP-Switch IP Deployment
ElenaLeeViews 134
Comments 0
A plug-in W5500 module turns GEVA Elettronica's EUR 74.80 SAMD21 stepper PLC into a networked controller with Modbus TCP, Telnet debug and FTP updates.
What Does the W5500 Ethernet Option Add to the GEVINO Motor Arduino PLC?
BenjaminViews 146
Comments 0
OI-Core, the ESP32-S3 master module of the OpenIndus rail-mounted PLC from Toulouse, gets its 10/100 Ethernet port from an embedded WIZnet W5500 on SPI.
What Role Does the W5500 Play in the OpenIndus OI-Core Modular Industrial PLC?
BenjaminViews 106
Comments 0
RectaBot
RectaBot
Aimee0Views 72
Comments 0
masterETH Controller: Centralized Management of dualETH and quadETH Art-Net Nodes via W5500 Ethernet
masterETH Controller: Centralized Management of dualETH and quadETH Art-Net Nodes via W5500 Ethernet
Aimee0Views 87
Comments 0
Nex-G Automation LLP in Hubballi, Karnataka sells the NXG-W5500-MOD, a WIZnet W5500 plug-in module with its own silkscreen, only on IndiaMART at 850 rupees.
Where Does the 850 Rupee NXG-W5500-MOD Ethernet Module Come From in India?
BenjaminViews 91
Comments 0
A WIZnet W5500, a 25.000 MHz crystal and a HanRun HR911105A jack. Augmatic Technologies of Vadodara sells it at INR 425, below its own ENC28J60 board.
What Is Inside the WittelB WIN-MD-W5500, an Own-Brand W5500 Module from India?
BenjaminViews 81
Comments 0
SUNTEC UECS Sensor Unit
SUNTEC UECS Sensor Unit
jadenViews 80
Comments 0
Naset RNS216M is a six-port HF/50 MHz coaxial switch using W5100S-EVB-Pico2 for browser-based LAN control, local switching, and automatic grounding.
GND接続機能付リモート同軸切替器 RNS216M (Naset RNS216M: A W5100S-EVB-Pico2-Based 6-Port Remote Coaxial Switch)
matthewViews 112
Comments 0
PMS04-B
PMS04-B
masonViews 91
Comments 0
Horter's EUR 24.90 I2ARL kit ships its LAN slot empty and its ATmega328P has no Ethernet MAC, so Modbus TCP needs the separate EUR 11.90 W5500 module.
Why Does the Horter I2ARL Need a Separate W5500 Module for Modbus TCP?
BenjaminViews 129
Comments 0
Somon's Halow-GW Wi-Fi HaLow gateway spends all eight W5500 hardware sockets on three TCP servers, two TCP clients, two UDP channels and one HTTP listener.
Where Do the Eight W5500 Hardware Sockets Go in Somon's Halow-GW?
BenjaminViews 142
Comments 0
PP-Ethernet-UART-HAT is a 45 x 30 mm PLATYPUS module that converts 3.3 V UART to Ethernet on a WIZnet W55RP20 and ships with W55RP20-S2E firmware preloaded.
Which PLATYPUS W55RP20 Module Converts 3.3 V UART to Ethernet Without Custom Firmware?
BenjaminViews 70
Comments 0
boneIO's gen 2 dimmer moved to an ESP32-S3, which has no Ethernet MAC, so its shipping firmware declares a WIZnet W5500 on SPI in place of gen 1's LAN8720.
Why Does the boneIO gen 2 DIN-Rail Dimmer Use a W5500 Instead of LAN8720?
BenjaminViews 165
Comments 0
Inoa Satellite Gateway
Inoa Satellite Gateway
masonViews 86
Comments 0
SlimmeLezer Pro — The W5500 That Gave Ethernet Back to the ESP32-C3, and Wired Up the Smart Meter Reader
SlimmeLezer Pro
scottViews 93
Comments 0
This project highlights a commercial 2-channel IP relay module designed for remote electrical equipment control over a network.
Module Relais IP 2 Canaux – Contrôle à Distance TCP/UDP, MODBUS TCP, Compatible KingView, Personnali
gunnViews 80
Comments 0
BioFi is a software-led hardware-enabled solution to personal healthcare.
Praesidium RemWave BioFi Device
brunoViews 97
Comments 0
블루투스 기능 등을 활용, 오프라인 매장에서 스마트폰에 대하여 무선 시건 기능을 제공함으로써 신제품에 대한 자유로운 체험 을 가능하게 하는 무선 보안 시스템입니다.
갤럭시 키퍼 GK(Galaxy Keeper)
brunoViews 93
Comments 0
All the I/O and connectivity of the CREST — without the Arduino headers.
NEXTuino CREST CORE
brunoViews 90
Comments 0
OpenKNX REG1 is an open hardware DIN-rail platform whose REG1-App-Eth board adds a WIZnet W5500 to an RP2040, bridging a KNX twisted-pair line and KNX-IP.
OpenKNX REG1: A Bus-Powered DIN-Rail KNX-IP Router on RP2040 and W5500
BenjaminViews 193
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?