Rack Fan Module & Controll System
unifan
Lihan__
Views 77

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,102 projects
Rack Fan Module & Controll System
unifan
Lihan__Views 77
Comments 0
STM32F407 gateway using WIZnet W5500 for Modbus-to-MQTT monitoring, offline data buffering, OTA rollback, and automatic 4G failover.
stm32f407-iot-gateway
lawrenceViews 139
Comments 0
EnergyMe Home Pro: An Ethernet-First Smart Energy Monitor Built with ESP32-S3 and W5500
EnergyMe Home Pro: An Ethernet-First Smart Energy Monitor Built with ESP32-S3 and W5500
Aimee0Views 133
Comments 0
OpenVela board-level adaptation for the SomatoSync motion synchronization system
VelaMotion
Sunny_Views 67
Comments 0
Industrial Modbus gateway: STM32F103 + FreeRTOS firmware (Modbus RTU<->TCP, W5500, OTA with dual-partition bootloader) and a Linux host
modbus-gateway
lawrenceViews 164
Comments 0
Modular RP2350 live-sound controller with W5500 Ethernet, motorized faders and display modules, built to prototype the Virgil audio-control protocol.
Can an Open Network Protocol Fix Live Audio Control? Proteus, Virgil and W5500
irinaViews 61
Comments 0
ESP32-S3 network diagnostics device: W5500 SPI Ethernet with DHCP/static IP, ping and subnet scan, plus Wi-Fi and BLE scanning on an ILI9341 UI.
Cranet: ESP32-S3 Network Diagnostics Handheld with W5500 Wired Ethernet, Wi-Fi and BLE
josephsrViews 96
Comments 0
Based on openvela and GigaDevice GD32F470V-START (onboard chip GD32F407VKT6, a new chip not fully supported by Openvela's official support), it is an intelligen
Electric bicycle charging electrical safety monitoring terminal
Sunny_Views 58
Comments 0
Unified Arduino drivers for CAN, CAN FD, RS-485, Modbus and W5500 Ethernet, with diagnostics, DHCP, sockets and portable no-heap design.
NiusBus: One Arduino Library for CAN, RS-485, Modbus and W5500 Ethernet
irinaViews 87
Comments 0
TinyDesk draws a windowed desktop from an ESP32 into a serial terminal, with Wi-Fi, optional W6100 Ethernet, RS-485, and MQTT/Modbus apps.
TinyDesk: A Windowed Text-Mode Desktop Served by an ESP32, with Optional W6100 Ethernet
josephsrViews 121
Comments 0
LuckFox-PicoMini-ParkingVision is a distributed smart-parking system that combines LuckFox Pico Mini RV1103 edge-AI boards with ESP32-S3
How to Build Distributed Smart Parking Vision with WIZnet W5500 on ESP32-S3 and LuckFox Pico Mini?
viktorViews 163
Comments 0
ezDV: How Soldering a W5500 onto a Wi-Fi FreeDV Device Added Wired Ethernet Without Touching the Radio Code
ezDV
scottViews 150
Comments 0
Summary Power Manifold is a six-port managed USB-C Power Delivery supply built around an RP2350 , independent charger blades, and a WIZnet W6100
How to Build a Managed USB-C Power Controller with WIZnet W6100 on RP2350?
viktorViews 105
Comments 0
A W55MH32L-EVB paints 772-byte RGB frames streamed over UDP onto an 8x32 WS2812B matrix, counting dropped frames on an OLED instead of hiding them.
Real-Time UDP Pixel Display & Stage Visualizer
TheoImViews 81
Comments 0
A resource-constrained microcontroller can use the WIZnet W5500 for wired TCP/IP communication while keeping sensitive records encrypted in external storage.
How to Build a Secure Industrial IoT Edge Device with W5500 and Local AES Encryption?
gavinchangViews 73
Comments 0
An STM32 microcontroller paired with the WIZnet W5500 provides a hardware-offloaded Ethernet architecture for industrial embedded devices.
How to Evaluate PROFINET Compatibility with W5500 on STM32?
markViews 83
Comments 0
Indoor / Outdoor Weather Monitor on W55MH32-ADK
Indoor / Outdoor Weather Monitor on W55MH32-ADK
gunnViews 72
Comments 0
This PR integrates WIZnet's W5500 Ethernet controller into open-source Bitcoin miners, providing CPU-offloaded, ultra-low-latency wired connectivity.
Nerd Eth interposer support- #724 #724 Merged shufps merged 2 commits into shufps:develop from BitMa
gunnViews 117
Comments 0
A GPS/PPS-based Stratum-1 NTP server using ESP32-S3 and WIZnet W5500 Ethernet to distribute accurate time over a local network.
GPS Clock — Serveur NTP stratum-1 sur ESP32-S3 + matrice HUB75
sophiaViews 88
Comments 0
An ESP32-S3 robotics control system using WIZnet W5500 Ethernet and Modbus TCP to communicate with a Beckhoff PLC for motor control and telemetry.
NASA Lunabotics: Dual-Core RTOS Motor Control & Telemetry System
sophiaViews 100
Comments 0
Jesse Hills turns an M5Stack CoreS3 and W5500 PoE base into a touchscreen tester for link, DHCP, IPv6 and ping, after fixing a shared SPI bus in ESPHome.
How Does a W5500 Network Toolbox Diagnose Ethernet from an M5Stack CoreS3?
BenjaminViews 132
Comments 0
A standalone RP2350-based Reticulum Transport Node that connects W5500 Ethernet and SX1262 LoRa.
rp2350_reticulum_eth_node
lawrenceViews 131
Comments 0
A remote SDR receiver using RP2350, W6300, and PoE to control an RTL-SDR over Ethernet and stream I/Q data to GQRX through rtl_tcp.
rp2350-poe-airband-iq
lawrenceViews 135
Comments 0
An ESP32-S3 DMX box that receives Art-Net over UDP 6454 through a W5500 and drives two DMX512 universes via MAX485, for about $29,33 in parts.
DMX-Unit-DIY: W5500 Art-Net node and 2-universe DMX512 controller on ESP32-S3
josephsrViews 163
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?