---
title: "Vinco Ethernet MP3 RTC Shield(VSHLD-EMR)"
url: "https://maker.wiznet.io/taylor/resellers/Vinco-Ethernet-MP3-RTC-ShieldVSHLDEMR/"
markdown_url: "https://maker.wiznet.io/taylor/resellers/Vinco-Ethernet-MP3-RTC-ShieldVSHLDEMR/md"
type: "VAR: Value-Added Reseller Products"
author: "taylor"
original_author: "taylor"
original_url: "http://wiznetmuseum.com/?post_type=avada_portfolio&p=21932"
published: "2021-06-07"
language: "en"
likes: 0
views: 213
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Vinco Ethernet MP3 RTC Shield(VSHLD-EMR)

> Vinco Ethernet MP3 RTC Shield(VSHLD-EMR)

Original author: taylor (source: http://wiznetmuseum.com/?post_type=avada_portfolio&p=21932)

## Documents and links

- [VSHLD-EMR](https://ftdichip.com/wp-content/uploads/2020/12/DS_Vinco-Ethernet-RTC-MP3-shield.pdf): Documentation

## Article

Original : <https://ftdichip.com/products/vshld-emr/> Vinco (inspired by Arduino) is a cost effective Vinculum-II (VNC2) development platform, designed to support rapid prototyping and development of USB 2.0 based processing applications with open-source hardware and software. Vinco supports the software drivers and libraries developed for the Vinculum II controller. Vinco Platform Features:

- Onboard VNC2-64 USB dual channel Host / unit controller with a powerful 16-bit / 48MHz MCU core, 256KB Flash and 16KB SRAM which also supports UART, FIFO, SPI (master and slave), PWM and GPIO interfaces.

- The Vinco I/O expansion bus is a superset of the popular Arduino Duemilanove / Uno platform with 2 extra rows of headers providing 10 additional interface pins thus making it easier to develop IO Boards (Shields) whilst avoiding hardware resource conflicts between different IO add-on cards.

- USB standard and mini connectors.

- 8-channel / 10-bit ADC and PWM interfaces.

- 38 general purpose I/Os (30 digital, 8 analogue).

- The Vinco supports connectivity to a wide range of application boards developed by the Arduino open-source community. These include Ethernet, motor control, LCD and many others.

- The Vinco uses a subset of standard ANSII C (instead of the wiring/processing based software platform) with

- FTDI supported, free-of-charge software development tools, libraries and reference designs.

- Debugger interface to the VNC2 DEBUG MODULE for rapid firmware debugging.

- Same PCB form factor as Arduino.

- Compatible with the Vinco Proto shield development board (VNCLO-SHLD-1A ? available below)

- 9V/1A DC input or USB powered (dependent on USB Host interface current requirements)

---

Source: https://maker.wiznet.io/taylor/resellers/Vinco-Ethernet-MP3-RTC-ShieldVSHLDEMR/