---
title: "HTPAd Application Shield"
url: "https://maker.wiznet.io/taylor/projects/htpad-application-shield/"
markdown_url: "https://maker.wiznet.io/taylor/projects/htpad-application-shield/md"
type: "UCC: User Created Content"
author: "heimannsensor"
author_url: "https://github.com/HeimannSensor/Arduino-DUE-Application-Shield"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "heimannsensor"
original_url: "https://github.com/HeimannSensor/Arduino-DUE-Application-Shield"
published: "2022-10-24"
language: "en"
hardware: ["Arduino Due", "Arduino Ethernet Shield"]
likes: 4
views: 1375
comments: 1
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# HTPAd Application Shield

> For thermal imaging and easy application of our arrays we designed an application board to read thermopile sensors with an Arduino.

Original author: heimannsensor (source: https://github.com/HeimannSensor/Arduino-DUE-Application-Shield)

## Components

- **Arduino Due** x 1 ([docs](https://www.farnell.com/datasheets/1682211.pdf))
- **Arduino Ethernet Shield** x 1 ([docs](https://docs.arduino.cc/retired/shields/arduino-ethernet-shield-without-poe-module))

## Documents and links

- [Arduino-DUE-Application-Shield](https://github.com/HeimannSensor/Arduino-DUE-Application-Shield) (code)
- [HTPA-Shield Overview](https://www.boselec.com/wp-content/uploads/Linear/Heimann/HeimannLiterature/HTPA-Shield-Overview.pdf)

## Article

Original : <https://github.com/HeimannSensor/Arduino-DUE-Application-Shield>

<https://github.com/HeimannSensor/Nucleo-64-STM32F446RE-Application-Shield>

<https://www.heimannsensor.com/development>

HEIMANN Sensor

![](https://maker.wiznet.io/upload/ckeditor5/694845886%5F1666631085%2Epng)

For thermal imaging and easy application of our arrays we designed an application board to read thermopile sensors with an Arduino board.

The source code is completely open and includes all required steps from reading the EEPROM and sensor values to calculation of the final temperature image. Therefore, the C++ sample code can be viewed and modified via the Arduino IDE. The PCB is designed as an Arduino extension and supports the board Arduino Due.

You can choose between two modes: Ethernet mode and Serial mode.

![](https://maker.wiznet.io/upload/ckeditor5/694845886%5F1666631135%2Epng)

---

Source: https://maker.wiznet.io/taylor/projects/htpad-application-shield/