---
title: "Connect your device to an Ethernet network"
url: "https://maker.wiznet.io/ssekim/projects/connect-your-device-to-an-ethernet-network/"
markdown_url: "https://maker.wiznet.io/ssekim/projects/connect-your-device-to-an-ethernet-network/md"
type: "UCC: User Created Content"
author: "Donets Anton"
author_url: "https://blog.radiotech.kz/interfejsy/podklyuchenie-ustrojstva-k-seti-ethernet/"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Donets Anton"
original_url: "https://blog.radiotech.kz/interfejsy/podklyuchenie-ustrojstva-k-seti-ethernet/"
published: "2022-08-30"
language: "en"
hardware: ["WIZnet W5300"]
likes: 4
views: 901
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Connect your device to an Ethernet network

> Sometimes there is a need to connect a device to an Ethernet network. To solve this problem, there are a huge number of different network co

Original author: Donets Anton (source: https://blog.radiotech.kz/interfejsy/podklyuchenie-ustrojstva-k-seti-ethernet/)

## Components

- **WIZnet W5300** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5300))

## Article

### Why the WIZNET W5300 chip?

It has:
a) a hardware-implemented TCP/IP protocol stack,
b) a parallel 8/16-bit data bus for exchanging information with the control processor (UP),
c) the maximum data exchange rate is almost 50 Mbps. g)
a built-in PHY transceiver (physical layer transceiver),
e) the internal memory of the transceiver 128 KB.

![](http://blog.radiotech.kz/wp-content/uploads/2017/07/c34211.png)

---

Source: https://maker.wiznet.io/ssekim/projects/connect-your-device-to-an-ethernet-network/