---
title: "c001_pi_pico_breakout_with_eth_W5500"
url: "https://maker.wiznet.io/simons/projects/c001-pi-pico-breakout-with-eth-w5500/"
markdown_url: "https://maker.wiznet.io/simons/projects/c001-pi-pico-breakout-with-eth-w5500/md"
type: "UCC: User Created Content"
author: "odinthenerd"
author_url: "https://github.com/skunkforce/c001_pi_pico_breakout_with_eth_W5500"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "odinthenerd"
original_url: "https://github.com/skunkforce/c001_pi_pico_breakout_with_eth_W5500"
published: "2023-05-16"
language: "en"
hardware: ["WIZnet W5500"]
likes: 1
views: 225
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# c001_pi_pico_breakout_with_eth_W5500

> pico with W5500

Original author: odinthenerd (source: https://github.com/skunkforce/c001_pi_pico_breakout_with_eth_W5500)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Article

![](https://maker.wiznet.io/upload/ckeditor5/277570174%5F1684248731%2Epng)

## edgy_board number c001

This design is part of the [edgy board project](https://github.com/skunkforce/edgy_boards).

[![](https://github.com/skunkforce/c001_pi_pico_breakout_with_eth_W5500/raw/master/board/board.png)](https://github.com/skunkforce/c001_pi_pico_breakout_with_eth_W5500/blob/master/board/board.png)

## getting started

This repository uses submodules. After cloning use the command

`$ git submodule update --init --recursive`

to pull the submodules before opening the project with kicad.

## Tests

Tests can be found in [TESTS.md](https://github.com/skunkforce/c001_pi_pico_breakout_with_eth_W5500/blob/master/TESTS.md)

---

Source: https://maker.wiznet.io/simons/projects/c001-pi-pico-breakout-with-eth-w5500/