---
title: "Linuxcnc RIO with Tang Nano 20k FPGA with esp32 and w5500 Ethernet"
url: "https://maker.wiznet.io/scarlet/projects/linuxcnc-rio-with-tang-nano-20k-fpga-with-esp32-and-w5500-ethernet/"
markdown_url: "https://maker.wiznet.io/scarlet/projects/linuxcnc-rio-with-tang-nano-20k-fpga-with-esp32-and-w5500-ethernet/md"
type: "UCC: User Created Content"
author: "TurBoss"
author_url: "https://www.youtube.com/watch?v=inAFxSs9Hak"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "TurBoss"
original_url: "https://www.youtube.com/watch?v=inAFxSs9Hak"
published: "2023-08-22"
language: "en"
likes: 0
views: 933
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Linuxcnc RIO with Tang Nano 20k FPGA with esp32 and w5500 Ethernet

> This is a demo of Linuxcnc-RIO running linuxcnc on a PC over UDP

Original author: TurBoss (source: https://www.youtube.com/watch?v=inAFxSs9Hak)

## Article

This is a demo of Linuxcnc-RIO running linuxcnc on a PC over UDP

---

Source: https://maker.wiznet.io/scarlet/projects/linuxcnc-rio-with-tang-nano-20k-fpga-with-esp32-and-w5500-ethernet/