---
title: "Quick Setup of W5500 Ethernet Shield for Internet"
url: "https://maker.wiznet.io/rena/projects/Quick-Setup-of-W5500-Ethernet-Shield-for-Internet/"
markdown_url: "https://maker.wiznet.io/rena/projects/Quick-Setup-of-W5500-Ethernet-Shield-for-Internet/md"
type: "UCC: User Created Content"
author: "rena"
original_author: "rena"
original_url: "https://xod.io/docs/guide/w5500-connect/"
published: "2019-04-01"
language: "en"
likes: 0
views: 457
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Quick Setup of W5500 Ethernet Shield for Internet

> Quick Setup of W5500 Ethernet Shield for Internet

Original author: rena (source: https://xod.io/docs/guide/w5500-connect/)

## Article

## Ethernet Shield node

In the simplest case, when you have a stock Ethernet Shield board and it’s the only DIY-device in your local network it is enough to place a single?[`xod-dev/w5500/ethernet-shield`](https://xod.io/libs/xod-dev/w5500/ethernet-shield/)?on your patch. ![Ehternet shield node](https://xod.io/docs/guide/w5500-connect/ethernet-shield.patch.png) The node has a?`CONN`?pulse which initiates the connection process. Make sure the?`CONN`?is bound to?`On Boot`?so that the shield tries to connect to the router when the program starts. The node outputs?`INET`?which represents the resulting internet connection along with?`OK`?and?`ERR`pulses which fire on success or failure. **Original link: **[**https://xod.io/docs/guide/w5500-connect/**](https://xod.io/docs/guide/w5500-connect/)

---

Source: https://maker.wiznet.io/rena/projects/Quick-Setup-of-W5500-Ethernet-Shield-for-Internet/