---
title: "How to use Arduino with TheThings.io"
url: "https://maker.wiznet.io/rena/projects/How-to-use-Arduino-with-TheThingsio/"
markdown_url: "https://maker.wiznet.io/rena/projects/How-to-use-Arduino-with-TheThingsio/md"
type: "UCC: User Created Content"
author: "rena"
author_url: "https://maker.wiznet.io/rena/"
original_author: "rena"
original_url: "https://www.survivingwithandroid.com/dht11-bmp180-arduino-thethings/"
published: "2022-02-24"
language: "en"
hardware: ["Arduino UNO", "Arduino Ethernet Shield", "DHT11", "BMP180"]
likes: 0
views: 196
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# How to use Arduino with TheThings.io

> How to use Arduino with TheThings.io

Original author: rena (source: https://www.survivingwithandroid.com/dht11-bmp180-arduino-thethings/)

## Components

- **Arduino UNO** x 1 ([docs](https://www.farnell.com/datasheets/1682209.pdf))
- **Arduino Ethernet Shield** x 1 ([docs](https://docs.arduino.cc/retired/shields/arduino-ethernet-shield-without-poe-module))
- **DHT11** x 1
- **BMP180** x 1
- Software: **TheThings.io**

## Article

## Components Required

To build this IoT project based on Arduino, you need the following components:

- Temperature (DHT11)

- Humidity (DHT11)

- Pressure (BMP180)

**Original link: <https://www.survivingwithandroid.com/dht11-bmp180-arduino-thethings>**

---

Source: https://maker.wiznet.io/rena/projects/How-to-use-Arduino-with-TheThingsio/