---
title: "WIZnet WizFi360"
url: "https://maker.wiznet.io/products/wizfi360/"
markdown_url: "https://maker.wiznet.io/products/wizfi360/md"
type: "WIZnet product hub"
product_page: "https://docs.wiznet.io/Product/Modules/Wi-Fi-Module/WizFi360"
projects: 60
language: "en"
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# WIZnet WizFi360

> Wi-Fi module controlled with AT commands over UART.

## Documents

- [Product page](https://docs.wiznet.io/Product/Modules/Wi-Fi-Module/WizFi360)

## Projects and products using WizFi360

- [How Does WizFi360 Connect a DIY ASCOM Alpaca Cover Calibrator to N.I.N.A.?](https://maker.wiznet.io/TheoIm/projects/how-does-wizfi360-connect-a-diy-ascom-alpaca-cover-calibrator-to-n-i-n-a/) (UCC, 2026-07-14): A telescope-automation maker uses WizFi360 AT commands, UDP discovery, and HTTP/JSON responses to expose a custom astronomical device to N.I.N.A. over a local.
- [Foenix Labs A2560Me Brings MC68LC060 CPU, FPGA Graphics, and PCIe Expansion](https://maker.wiznet.io/Grace_Koo/resellers/foenix-labs-a2560me-brings-mc68lc060-cpu-fpga-graphics-and-pcie-expansion-1/) (VAR, 2026-04-10): The A2560Me pairs a Motorola MC68LC060 with WIZnet's W6100 and WizFi360, offloading IPv4/IPv6 TCP/IP to hardware on a 66 MHz legacy CPU.
- [cSTER-devices](https://maker.wiznet.io/TheoIm/projects/cster-devices/) (UCC, 2026-04-10): Cortex-M4F driver framework using WizFi360-PA over UART to enable MQTT via Wi-Fi, offloading TCP/IP from the MCU for modular embedded control systems.
- [Relay-Flask-MQTT-WizFi360](https://maker.wiznet.io/TheoIm/projects/relay-flask-mqtt-wizfi360/) (UCC, 2026-02-19): Relay-Flask-MQTT-WizFi360
- [F256-Wizfi360](https://maker.wiznet.io/TheoIm/projects/f256-wizfi360/) (UCC, 2026-02-19): F256-Wizfi360
- [Wireless Data Acquisition - Wireless, Low-Cost, and Portable EMG System](https://maker.wiznet.io/Hannah/projects/wireless-data-acquisition-wireless-low-cost-and-portable-emg-system/) (UCC, 2026-02-12): Wireless, Low-Cost, and Portable EMG System
- [TinyML enabled Low Power Exhaust Fans for Smart Buildings](https://maker.wiznet.io/Lihan__/projects/tinyml-enabled-low-power-exhaust-fans-for-smart-buildings/) (UCC, 2025-12-05): A prototype smart exhaust fan controlled by MCXN236 + WizFi360 + BME688 that adjusts fan operation based on air quality (VOC).
- [Lottery Monitor (Hong Kong Mark Six Lottery) - Cloud Pixel](https://maker.wiznet.io/gavinchang/projects/lottery-monitor-hong-kong-mark-six-lottery-cloud-pixel/) (WCC, 2024-03-22): Cloud Pixel : Record the lottery results of previous periods and make statistics to see which number appears the most often.
- [pxt-grove-uart-wizfi360](https://maker.wiznet.io/louis_m/projects/pxt-grove-uart-wizfi360/) (UCC, 2024-03-04): A Microsoft MakeCode package for Grove Uart WizFi360. This is a module similar to Grove Uart WiFi v2.
- [Digital QR Scanner (QR Code Recorder & QR Code Classify & Chip Counter all in one )](https://maker.wiznet.io/gavinchang/projects/digital-qr-scanner-qr-code-recorder-qr-code-classify-chip-counter-all-in-one/) (WCC, 2023-12-20): Digital QR Scanner (QR Code Recorder & QR Code Classify & Chip Counter all in one )
- [3D Laser Radar: "Cloud Motion" work with "Cloud Pixel"](https://maker.wiznet.io/gavinchang/projects/3d-laser-radar%3A-cloud-motion-work-with-cloud-pixel/) (WCC, 2023-10-19): Cloud Motion is a 2-degree-of-freedom network gimbal.3D Laser Radar is the first application on Cloud Movtion, which work with Cloud Pixel.
- [wiznetfi360-ota](https://maker.wiznet.io/mason/projects/wiznetfi360-ota/) (UCC, 2023-10-04): wiznetfi360-ota
- [3D Laser Radar Tower based on 2-degree-of-freedom network gimbal (POE+PICO)](https://maker.wiznet.io/gavinchang/projects/3d-laser-radar-tower-based-on-2-degree-of-freedom-network-gimbal-poe-pico/) (WCC, 2023-09-22): Dynamic scanning of lidar is performed through 2-degree-of-freedom network gimbal to form a 3D photo containing distance information.
- [AnyPrint：Print any Text by Cloud Printer](https://maker.wiznet.io/gavinchang/projects/anyprint%EF%BC%9Aprint-any-word-by-cloud-printer/) (WCC, 2023-08-30): In order to use Cloud Printer with PC, I use Chatgpt to help develop a Python program, which can use Cloud Printer to print any text
- [Digital Safe Box (RP2040+W5100S+FingerPrint) Part 2 (Finished)](https://maker.wiznet.io/gavinchang/projects/digital-safe-box-rp2040-w5100s-fingerprint-part-2-finished/) (WCC, 2023-08-21): Make a Digital Safe Box using Raspberry Pi RP2040 ,Fingerprint, Servo, OLED, Buzzer and W5100S Wizfi360 .
- [IoT Gateway : W5500 + Raspberry Pi Pico + WizFi360](https://maker.wiznet.io/luca__________/projects/stm32-microcontroller%3A-on-line-connect-with-wiznet-w5500/) (UCC, 2023-08-02): Микроконтроллеры STM32: выходим в сеть с Wiznet W5500
- [Cloud Camera(Raspberry Pi RP2040 + w5100s + POE) Part 1：Hardware](https://maker.wiznet.io/gavinchang/projects/cloud-camera-raspberry-pi-rp2040-w5100s-poe-part-1%EF%BC%9Ahardware/) (WCC, 2023-06-19): I want to develop a RP2040-based IP camera, and do application development based on the cloud platform.
- [HTU21DLibrary](https://maker.wiznet.io/mason/projects/htu21dlibrary/) (UCC, 2023-06-15): HTU21DLibrary
- [WizFi360 Smart Farm Project](https://maker.wiznet.io/WIZnet/projects/wizfi360-smart-farm-project/) (UCC, 2023-05-31): WizFi360 Smart Farm Project
- [Provide solutions to help organizations adopt A.I. technologies](https://maker.wiznet.io/simons/projects/provide-solutions-to-help-organizations-adopt-a-i-technologies/) (WCC, 2023-05-18): I propose to utilize the existing wiznet chip to perform AI projects using ChatGPT.
- [ChatGPT Recorder & printer(Raspberry Pi Pico & WizFi360)](https://maker.wiznet.io/gavinchang/projects/chatgpt-recorder-printer-raspberry-pi-pico-wizfi360/) (WCC, 2023-03-23): Print all the conversation process with ChatGPT and store it in the SD card
- [OrangeBoard WiFi+ 펌웨어 업데이트 하기 – Upgrade tool 사용](https://maker.wiznet.io/WIZnet/projects/orangeboard-wifi-%ED%8E%8C%EC%9B%A8%EC%96%B4-%EC%97%85%EB%8D%B0%EC%9D%B4%ED%8A%B8-%ED%95%98%EA%B8%B0-%E2%80%93-upgrade-tool-%EC%82%AC%EC%9A%A9/) (UCC, 2023-03-06): WizFi360 Library setting
- [Grove UART WizFi360](https://maker.wiznet.io/gavinchang/resellers/grove-uart-wizfi360/) (VAR, 2023-03-02): Grove UART WizFi360 is based on Wiznet's wizfi360 Wi-Fi module, which is a cost-effective WiFi module that supports both TCP/IP and microcon
- [AWS_MQTT_LPCXpresso55S69_WizFi360_WiFi_RTX](https://maker.wiznet.io/WIZnet/projects/aws-mqtt-lpcxpresso55s69-wizfi360-wifi-rtx/) (UCC, 2023-02-21): Project to connect to AWS cloud using WizFi360
- [Robot_Arm_on_PICO](https://maker.wiznet.io/WIZnet/projects/robot-arm-on-pico/) (UCC, 2023-02-21): The robot arm steering project with W-Fi communication via module WizFi360
- [Arduino sensor data measurement code](https://maker.wiznet.io/austin/projects/arduino-sensor-data-measurement-code/) (UCC, 2023-02-21): Project using WizFi360
- [Combination of dual GNSS and gyro sensor solves initial position and orientation](https://maker.wiznet.io/austin/projects/combination-of-dual-gnss-and-gyro-sensor-solves-initial-position-and-orientation/) (UCC, 2023-02-21): Project using WizFi360
- [Development of Wireless Heat Variation Detection System between MCCBs and MCs within an MCC](https://maker.wiznet.io/WIZnet/projects/development-of-wireless-heat-variation-detection-system-between-mccbs-and-mcs-within-an-mcc/) (UCC, 2023-02-14): Development of Wireless Heat Variation Detection System between MCCBs and MCs within an MCC
- [ChatGPT Recorder & Monitor(Raspberry Pi Pico & WizFi360)](https://maker.wiznet.io/gavinchang/projects/chatgpt-recorder-monitor-raspberry-pi-pico-wizfi360/) (WCC, 2023-02-13): Record all chatgpt conversations, store them in the SD card, and display them on the screen.
- [Simply network projects with the WizFi360 (Mit dem WizFi360 Projekte einfach vernetzen)](https://maker.wiznet.io/WIZnet/projects/simply-network-projects-with-the-wizfi360-mit-dem-wizfi360-projekte-einfach-vernetzen/) (UCC, 2023-02-09): This is where the WizFi360 module comes into play. The small circuit board enables any microcontroller to be expanded with a corresponding
- [AWS MQTT with STMicroelectronics 32F746GDISCOVERY](https://maker.wiznet.io/WIZnet/projects/aws-mqtt-with-stmicroelectronics-32f746gdiscovery/) (UCC, 2023-02-07): Quickly connect to AWS IoT, send messages over MQTT and check device status in AWS.
- [Wireless Cloud Connectivity Made Easy](https://maker.wiznet.io/WIZnet/projects/wireless-cloud-connectivity-made-easy/) (UCC, 2023-02-07): CMSIS-Drivers for WiFi connectivity is a standardized interface, that makes cloud connectivity simple
- [Agora Pico - ePaper display with RPi Pico and WiFi](https://maker.wiznet.io/wiz_chandana/projects/agora-pico-epaper-display-with-rpi-pico-and-wifi/) (UCC, 2023-02-02): 4.2" ePaper display with Raspberry Pico and WiFi using MicroPython
- [khoih-prog / ESP_AT_Lib](https://maker.wiznet.io/mayuri/projects/khoih-prog-esp-at-lib/) (UCC, 2023-02-01): Features This is an WizFi360/ESP8266/ESP32 wrapper library for Arduino providing an easy-to-use way to manipulate WizFi360/ESP8266/ESP32-AT
- [Updating WizFi360 Firmware Over the Air (OTA)](https://maker.wiznet.io/taylor/projects/updating-wizfi360-firmware-over-the-air-ota/) (UCC, 2023-01-29): With the WizFi360 module connected to the internet (see this post), I can upgrade the firmware.
- [Testing Wizfi360io-H using 3.3V FTDI Cable](https://maker.wiznet.io/taylor/projects/testing-wizfi360io-h-using-3-3v-ftdi-cable/) (UCC, 2023-01-29): am working on a project where I want to use a WizFi360 to provide WiFi services to a Teensy 4.0. It looks (at least at first glance) much l
- [Todolist Sync Monitor (Raspberry Pi Pico & WizFi360)](https://maker.wiznet.io/gavinchang/projects/raspberry-pi-pico-wizfi360-todolist-sync-monitor/) (WCC, 2023-01-26): Sync with [Todoist] website, Get the To do list and display on the Screen(ILI9488), You can update the task list when finish this task.
- [WizFiBuddy - WizFi360 Based Work Assistance](https://maker.wiznet.io/wiz_chandana/projects/wizfibuddy-wizfi360-based-work-assistance-1/) (UCC, 2022-12-05): WizFiBuddy is a tiny office assistance hardware that utilizes WizFi360.
- [FIFA World Cup 2022 Schedule Monitor(Raspberry Pi Pico & WizFi360 &Football-data)](https://maker.wiznet.io/gavinchang/projects/fifa-world-cup-2022-schedule-moniter/) (WCC, 2022-12-02): Use Raspberry Pi RP2040 & WizFi360 to display FIFA 2022 Schedule through football-data API on the screen(GC9A01)
- [Wireless Weather Monitor(Raspberry Pi Pico & WizFi360 & Openweather)](https://maker.wiznet.io/gavinchang/projects/wireless-weather-moniter/) (WCC, 2022-11-25): Use Raspberry Pi RP2040 & WizFi360 to display Weather info through openweather API on the screen(GC9A01)
- [Raspberry Pi Pico & WizFi360 Wireless Thermography](https://maker.wiznet.io/gavinchang/projects/raspberry-pi-pico-wizfi360-wireless-thermography/) (WCC, 2022-11-09): Raspberry Pi Pico & WizFi360 Wireless Thermography
- [MiniCopter - A Programmable Nano Drone Platform](https://maker.wiznet.io/chathu_liyan/contest/minicopter-a-programmable-nano-drone-platform/) (Contest, 2022-11-06): A compact and single board quadcopter platform powered with WizFi360-PA module to facilitate STEM Learning.
- [WizFiBuddy - WizFi360 Based Work Assistance](https://maker.wiznet.io/amalmathewtech/contest/wizfibuddy-wizfi360-based-work-assistance/) (Contest, 2022-10-31): WizFiBuddy is a tiny office assistance hardware which utilizes WizFi360.
- [Intelligent fish tank](https://maker.wiznet.io/mingkeyu/contest/intelligent-fish-tank/) (Contest, 2022-10-31): The fish tank is connected to the Internet through wifi to realize remote monitoring and control.
- [WizFi360 LED Controller Board](https://maker.wiznet.io/durairaj/contest/wizfi360-led-controller-board/) (Contest, 2022-10-21): Hi, I would like to make a WizFi360 LED controller PCB that can be controlled using a mobile application or using sensors & edge AI.
- [Grove_WizFi360 + SNTP, GPIO CONTROL](https://maker.wiznet.io/viktor/projects/grove-wizfi360-sntp%2C-gpio-control/) (UCC, 2022-10-19): Connecting the Grove_WizFi360, a serial transceiver module featuring WizNet's WizFi360 to PC and trying out some AT Commands.
- [Grove - WizFi360](https://maker.wiznet.io/teju/resellers/grove-wizfi360/) (VAR, 2022-09-27): Currently, Seeed Studio has developed over 400 Grove modules ranging from sensors, LEDs, inputs, wireless, displays, actuators, breakouts, k
- [An Egg-cellent and Egg-citing Eggs-periment in Edge ML](https://maker.wiznet.io/teju/projects/an-egg-cellent-and-egg-citing-eggs-periment-in-edge-ml/) (UCC, 2022-09-26): The egg industry may not make headlines in the national news very often, but that does not mean it is not serving an important role in our l
- [WizOnOff](https://maker.wiznet.io/nk_maker/contest/wizonoff/) (Contest, 2022-09-25): WizOnOff is WizFi360-PA module based Opensource standalone multicloud supported device for automation with 4 relay and 1 temperature sensor
- [SSL Client for Raspberry Pi Pico with WizFi360](https://maker.wiznet.io/scarlet/projects/ssl-client-for-raspberry-pi-pico-with-wizfi360/) (UCC, 2022-09-23): SSL Client for Raspberry Pi Pico with WizFi360
- [W5500 Ethernet Shield +Raspberry Pi Pico+ Wizfi360](https://maker.wiznet.io/nagamma06/projects/w5500-ethernet-shield-raspberry-pi-pico-wizfi360/) (UCC, 2022-08-30): W5500 Ethernet Shield (Raspberry Pi Pico) Server + Wizfi360 WiFi Module (Raspberry Pi Pico)Client Passes Temperature Measurement Data
- [New, three dimensional desktop printer control system based on STM32F4 microcontroller with extended](https://maker.wiznet.io/mayuri/projects/three-dimensional-desktop-printer/) (UCC, 2022-08-29): The article presents the design of a new three-dimensional desktop printer control system developed with use of experience in the operation
- [Aduino web server with WizFi360 WiFi interface](https://maker.wiznet.io/gemma/projects/Aduino-web-server-with-WizFi360-WiFi-interface/) (UCC, 2022-04-25): Aduino web server with WizFi360 WiFi interface
- [Watson_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_RTX](https://maker.wiznet.io/mason/projects/WatsonMQTTDemoIMXRT1050EVKBWizFi360WiFiRTX/) (UCC, 2022-04-25): Watson_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_RTX
- [AWS_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_FreeRTOS](https://maker.wiznet.io/mason/projects/AWSMQTTDemoIMXRT1050EVKBWizFi360WiFiFreeRTOS/) (UCC, 2022-04-25): AWS_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_FreeRTOS
- [Azure_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_RTX](https://maker.wiznet.io/mason/projects/AzureMQTTDemoIMXRT1050EVKBWizFi360WiFiRTX/) (UCC, 2022-04-25): Azure_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_RTX
- [Watson_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_FreeRTOS](https://maker.wiznet.io/mason/projects/WatsonMQTTDemoIMXRT1050EVKBWizFi360WiFiFreeRTOS/) (UCC, 2022-04-25): Watson_MQTT_Demo_IMXRT1050-EVKB_WizFi360_WiFi_FreeRTOS
- [Connect to NTP server with WiFi](https://maker.wiznet.io/louis_m/projects/Connect-to-NTP-server-with-WiFi/) (UCC, 2022-03-23): Connect to NTP server with WiFi
- [Robot arm steering project with Wi-Fi communication via module WizFi360.](https://maker.wiznet.io/wiz_chandana/projects/Robot-arm-steering-project-with-WiFi-communication-via-module-WizFi360/) (UCC, 2022-03-03): Robot arm steering project with Wi-Fi communication via module WizFi360.
- [Arduino Webserver mit WizFi360 WiFi Schnittstelle](https://maker.wiznet.io/Dinesh/projects/Arduino-Webserver-mit-WizFi360-WiFi-Schnittstelle/) (UCC, 2021-07-06): Arduino Webserver mit WizFi360 WiFi Schnittstelle

## Related forum questions

- [\[WizFi360\] TCP Server Port cannot be reopened while Ping is still responding](https://maker.wiznet.io/forum/16044) (2026-04-21, 1 replies)
- [Wizfi360 AT+WIZ_NETCONFIG 모드에서 WIFI 네트워크 노출 SSID](https://maker.wiznet.io/forum/15985) (2026-02-03, 2 replies)
- [Wizfi360 SSL connection causes WIFI to reconnect](https://maker.wiznet.io/forum/15916) (2025-10-22, 1 replies)
- [Wizfi360 AWS iot core 연결 문의](https://maker.wiznet.io/forum/15861) (2025-09-03, 2 replies)
- [Wizfi360 AT 커맨드 CWJAP, CIPSTART 문제](https://maker.wiznet.io/forum/15801) (2025-07-11, 2 replies)
- [Wizfi360 AT 커맨드 응답문의](https://maker.wiznet.io/forum/15791) (2025-07-08, 2 replies)
- [WizFi360 TCP transparent mode](https://maker.wiznet.io/forum/15771) (2025-06-20, 2 replies)
- [wizfi360 AP모드작동중 응답이 없어요](https://maker.wiznet.io/forum/15755) (2025-06-11, 1 replies)
- [Request for WizFi360 SDK, Driver Integration and Web Hosting Support for Yocto on ARM Cortex-A8 SBC](https://maker.wiznet.io/forum/15708) (2025-04-22, 3 replies)
- [Wizfi360 TCP can’t retrive fully the response](https://maker.wiznet.io/forum/15626) (2025-03-09, 3 replies)

---

Source: https://maker.wiznet.io/products/wizfi360/